Yamaha MOTIF6 Voice Editor Manual - page 18
18
2
SLOPE
............................Determines the slope or ramp characteristics of the LFO wave.
• OFF ............................. No slope; the LFO instantly jumps to the level of each step.
• UP ............................... The LFO ramps up to the next step, when that step is higher in
value. No slope for lower steps.
• DOWN......................... The LFO ramps down to the next step, when that step is lower in
value. No slope for higher steps.
• UP & DOWN................ The LFO ramps both up and down to the level of each step.
3
TEMPLATE
......................You can select a pre-programmed template for the LFO wave.
The selected template's wave graph appears in the dialog.
• random........................ Randomly generates step values, creating each time a different
random LFO wave.
• all0 .............................. Values of all the steps are set to 0.
• all64 ............................ Values of all the steps are set to 64.
• all127 .......................... Values of all the steps are set to 127.
• saw up ........................ Creates a saw shaped upward wave.
• saw down.................... Creates a saw shaped downward wave.
• even step .................... Values of all even steps are set to 127, and values of all odd steps
are set to 0.
• odd step...................... Values of all odd steps are set to 127, and values of all even steps
are set to 0.
4
Wave graph
.....................Click on the text box and select the method of restarting the LFO
when a note is played.
5
RESET
.............................Values of all the steps are reset to 0.
6
VALUE
.............................Edit the value for each step by using the corresponding knob.
CONTROLLER (Plug-in Voice only)
This determines the depth of pitch, cutoff, pitch modulation, cutoff modulation, and amplitude
modulation.
8
ELEMENT unit
This section is explained in more detail in “Element Unit” (
9
INSERTION EFFECT units
This section is explained in more detail in “Insertion Effect” (
)
SYSTEM EFFECT settings
This section is explained in more detail in “System Effects” (
).
!
Keyboard
Click any key on the keyboard to monitor your edited voice in that key.
@
KEY ASSIGN settings
Click on the left text box to select a Key Assign setting. Click on the right text box to select
Monophonic or Polyphonic. The “KEY ASSIGN” settings are not available for Drum Voices.
#
MICRO TUNE settings
Click on the text box to select a Micro Tuning preset.
The “MICRO TUNE” settings are not available for Drum Voices.