- DL manuals
- Yamaha
- Speakers
- NS-P610
- Owner's Manual
Yamaha NS-P610 Owner's Manual
Summary of NS-P610
Page 1
I ns-p610 home cinema 5.1ch speaker package 5.1 system d’enceintes home cinema owner’s manual mode d’emploi u c a.
Page 2: Safety Instructions
Ii • explanation of graphical symbols the lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to pe...
Page 3: III
Iii we want you listening for a lifetime yamaha and the electronic industries association’s consumer electronics group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most ...
Page 4: Unpacking
Iv unpacking after unpacking, check that the following items are contained. Deballage après le déballage, vérifier que les pièces suivantes sont incluses. ● pin plug cord ● câbles à fiches ● speaker cords ● câbles d’enceintes ● speaker cords ● câbles d’enceintes ● mounting brackets ● supports de mon...
Page 5
English e- 1 ● to assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. ● install the speakers in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (t...
Page 6: Contents
E- 2 contents safety instructions .............................. Ii unpacking .................................................. Iv caution ......................................................... 1 components of the package .............. 2 setting up the speakers ...................... 3 placing ...
Page 7: Placing The Subwoofer
English e- 3 䡵 placing the subwoofer it is recommended to place the subwoofer on the outside of either the right or the left main speaker. (see fig. Å .) the placement shown in fig. ı is also possible, however, if the subwoofer system is placed directly facing the wall, the bass effect may die becau...
Page 8: Mounting The Rear Speakers
E- 4 mount the rear speakers on a shelf, rack or directly on the floor, or hang them on the wall. To mount the rear speakers on a wall by using the provided mounting brackets 1 attach the bracket to the rear of the speaker by using the provided screws. Remove the provided pads from the backing sheet...
Page 9: Mounting The Center Speaker
English e- 5 place the center speaker on top of the tv, on the floor under the tv or inside the tv rack so that it is stable. 䡵 mounting the center speaker the front cover is fastened to the enclosure at four points and can be removed if desired. To remove the cover, hold on to both sides and slowly...
Page 10: Connections
E- 6 connections caution: plug in the subwoofer and other audio/video components after all connections are completed. ● connect the main, center and rear speakers to the speaker output terminals of your amplifier with the provided speaker cords. * the provided speaker cords have labels marked front ...
Page 11: How to Connect Speaker Cords
English e- 7 for connections, keep the speaker cords as short as possible. Do not bundle or roll up the excess part of the cords. If the connections are faulty, no sound will be heard from the speakers. Make sure that the + and – polarity markings of the speaker cords are observed and set correctly....
Page 12
E- 8 notes ● some amplifiers have line output terminals labeled pre out. When you connect the subwoofer to the pre out terminals of the amplifier, make sure that the amplifier has at least two sets of pre out terminals. If the amplifier has only one set of pre out terminals, do not connect the subwo...
Page 13: Amplifier
English e- 9 䡵 connecting the subwoofer to speaker output terminals of the amplifier if your amplifier has only one set of main speaker output terminals connect the speaker output terminals of the amplifier to the input1 terminals of the subwoofer, and connect the output terminals of the subwoofer t...
Page 14: Controls and Their Functions
E- 10 using the subwoofer (yst-sw45) 1 power indicator lights up while the subwoofer is turned on. * if the standby/on ( 2 ) button is pressed in and the auto standby ( 9 ) switch is set to the high or low position, this indicator lights up dimly when no signal is inputted to the subwoofer. 2 standb...
Page 15
English e- 11 if the source being played is stopped and the input signal is cut off for 7 to 8 minutes, the subwoofer automatically switches to the standby mode. (when the subwoofer switches to the standby mode, the power indicator ( 1 ) becomes dim.) when you play a source again, the power of the s...
Page 16
E- 12 1 set the volume control of the amplifier to minimum (0). 2 turn on the power of all the other components. 3 press the standby/on button to turn on the subwoofer. 4 play a source and adjust the amplifier’s volume control to the desired listening level. 5 adjust the high cut control to the posi...
Page 17: Frequency Characteristics
English e- 13 䡵 frequency characteristics adjustment of the volume control and the high cut control should be changed depending on the room size, the distance from the subwoofer to the main speakers, sources, etc. Following figures show the optimum adjustment of each control and the frequency charac...
Page 18: (For Yst-Sw45)
E- 14 advanced yamaha active servo technology (for yst-sw45) the theory of yamaha active servo technology has been based upon two major factors, the helmholtz resonator and negative-impedance drive. Active servo processing speakers reproduce the bass frequencies through an “air woofer”, which is a p...
Page 19: Troubleshooting
English e- 15 problem no sound. Sound level is too low. What to do connect them securely. Connect them correctly, that is l (left) to l, r (right) to r, “+” to “+” and “–” to “–”. Cause speaker cords are not connected securely. Speaker cords are not connected correctly. Troubleshooting refer to the ...
Page 20: Specifications
E- 16 specifications ns-10mmt type ............. 2-way 2-speaker bass-reflex speaker system magnetically shielded type driver woofer ...................................... 9 cm (3-9/16”) cone type tweeter .......................... 2.5 cm (1”) balanced dome type nominal input power ....................
Page 21
Yamaha electronics corporation, usa 6660 orangethorpe ave., buena park, calif. 90620, u.S.A. Yamaha canada music ltd. 135 milner ave., scarborough, ontario m1s 3r1, canada yamaha electronik europa g.M.B.H. Siemensstr, 22-34, 25462 rellingen, bei hamburg, f.R. Of germany yamaha electronique france s....