Yamaha NX-SW10 Owner's Manual

Other manuals for NX-SW10: Service Manual

Summary of NX-SW10

  • Page 1

    Owner’s manual mode d’emploi manual de instrucciones nx-sw10 subwoofer/center speaker/rear speakers caisson de grave/enceinte centrale/ enceintes arriere uca.

  • Page 2

    Caution important safety instructions 1 read these instructions. 2 keep these instructions. 3 heed all warnings. 4 follow all instructions. 5 do not use this apparatus near water. 6 clean only with dry cloth. 7 do not block any ventilation openings. Install in accor- dance with the manufacturer’s in...

  • Page 3

    Caution intr oductioin prep ara tions pla yb a c k setup menu appendix english we want you listening for a lifetime yamaha and the electronic industries association’s consumer electronics group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come...

  • Page 4: For Sw-Vs10

    Caution 1 to assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 install the speakers in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transf...

  • Page 5: Features

    1 english features ● home theater sound connecting this system to the vs-10 (sold separately) allows you to enjoy the power of low bass sounds plus surround effects. ● centralized control with the vs-10 (sold separately) the vs-10 is used to do things such as adjust the subwoofer level and adjust th...

  • Page 6: Subwoofer (Sw-Vs10)

    2 ■ subwoofer (sw-vs10) place the subwoofer at the outside of the either right or left main speaker and turn it slightly toward the center of the room to reduce the wall reflections. Try altering the position of the subwoofer versus the listening position as the relative position will affect the way...

  • Page 7: Connections

    3 english caution always be sure to turn off the power of any component to be connected when making connections. To ensure proper connections • be sure all connections are made correctly, that is to say l (left) to l, r (right) to r, “+” to “+” and “–” to “–”. Some components require different conne...

  • Page 8

    4 1 2 2 3 1 2 3 1 hold down the tab. 2 insert the bare wire of the speaker cord into the hole. 3 release the tab. (the tab will return to its original position when you release your finger.) • connect the line-in cord to the + terminals (red) on the right, and the other cord to the – terminals (blac...

  • Page 9

    5 english digital 1 ( v /pcm) video 1 tv video signal input main speakers subwoofer out monitor out system connector mark do not connect this unit to speakers other than nx-vs10m + – + – + – + – rear, center speakers system connector mark do not connect this unit to speakers other than nx-vs10e, nx-...

  • Page 10: Using The Velcro Strips

    6 note • once the center speaker is secured in this way, the paint on the television surface used for installation may peel off when velcro strip is removed later. Be sure to apply velcro strip after carefully checking the surface to be used for installation. Press down. 4 align both the velcro stri...

  • Page 11: Wall

    7 english note • after mounting, check that the speakers are attached securely. 20 mm or more 7 mm 70 mm 70 mm wood screws having a diameter of about 4 to 5 mm (commercially available) ■ mounting speakers directly on the wall it is possible to hang the speakers directly on the wall without using the...

  • Page 12: Holes: 60 Mm)

    8 cautions be sure to read these important precautions. • each speaker weighs approximately 0.7 kg. Select a firm wall or pillar to attach screws to. Do not attach screws to material such as mortar or veneer as screws may come loose easily, causing the speaker to fall. • do not mount speakers using ...

  • Page 13: Troubleshooting

    9 english no sound from the center speaker or the rear speakers. • is the ac power supply cord connected? No sound at all. 5 • hum caused by external electromagnetic waves may be generated. Try inverting the right-left polarity of the power cord and re-insert into the ac outlet. A “humming” noise is...

  • Page 14: Specifications

    10 rear speakers (nx-vs10e) type .......................................................... Acoustic suspension type speaker ........................................ 8-cm cone, magnetically shielded maximum input power ............................................................. 30 w impedance .......

  • Page 15

    Yamaha electronics corporation, usa 6660 orangethorpe ave., buena park, calif. 90620, u.S.A. Yamaha canada music ltd. 135 milner ave., scarborough, ontario m1s 3r1, canada yamaha electronik europa g.M.B.H. Siemensstr. 22-34, 25462 rellingen bei hamburg, f.R. Of germany yamaha electronique france s.A...