Yamaha VS-10 Service Manual

VS-10/NX-SW10

Home Theater System

VS-10

Front Speaker

NX-VS10M

Rear Speaker

NX-VS10E

Rear Speaker

NX-VS10E

Center Speaker

NX-VS10C

NX-SW10 is composed of SW-VS10, NX-VS10C and NX-VS10E.

VS-10 is composed of VS-10 and NX-VS10M.

Front Speaker

NX-VS10M

Subwoofer

SW-VS10

SERVICE  MANUAL

HOME THEATER SYSTEM

VS-10/NX-SW10

1 0 0 7 3 3

■

CONTENTS

TO SERVICE PERSONNEL .......................................... 1

REMOTE CONTROL TRANSMITTER PANELS ........... 1

FRONT/REAR PANELS ............................................ 2~4

SPECIFICATIONS .......................................................... 5

DIMENSIONS ................................................................. 6

INTERNAL VIEW ........................................................... 7

VS-10 DISASSEMBLY PROCEDURES ........................ 7

P. C. B. OPERATION CHECK ....................................... 8

SW-VS10 DISASSEMBLY PROCEDURES .................. 9

TEST PROGRAM MODE (VS-10) ......................... 10~11

DSP DIAG MODE (Self-diagnosis) ...................... 12~18

IC DATA ................................................................. 19~25

BLOCK DIAGRAM ................................................. 26~29

PRINTED CIRCUIT BOARD .................................. 30~41

SCHEMATIC DIAGRAM ........................................ 42~46

PARTS LIST ........................................................... 47~63

DISPLAY DATA ........................................................... 64

REMOTE CONTROL TRANSMITTER .................. 65~66

IMPORTANT NOTICE

This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.

It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users,

and have therefore not been restated.

WARNING:

Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive

components, and failure of the product to perform as specified.  For these reasons, we advise all YAMAHA product owners that any service required

should be performed by an authorized YAMAHA Retailer or the appointed service representative.

IMPORTANT:

The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable

technical capabilities, or establish a principle-agent relationship of any form.

The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover.  The research, engineering, and service departments of YAMAHA are

continually striving to improve YAMAHA products.  Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to

retrofit.  Should any discrepancy appear to exist, please contact the distributor's Service Division.

WARNING:

Static discharges can destroy expensive components.  Discharge any static electricity your body may have accumulated by grounding yourself to the

ground buss in the unit (heavy gauge black wires connect to this buss).

IMPORTANT:

Turn the unit OFF during disassembly and part replacement.  Recheck all work before you apply power to the unit.

VS-10/NX-SW10

P.O.Box 1, Hamamatsu, Japan