Yamaha Portatone PSR-225 Owner's Manual - Exit From The Record Mode.

88

SONG RECORDING

This operation deletes

all previously recorded

notes that follow the

note to be replaced.

Make sure you wish to

delete any subsequent

notes before actually

replacing the selected

note or rest.

Replacing a Note or Rest

If you want to change a note or rest you’ve just recorded, you can easily

replace it with a new one.  To do this:

1)

 Select the desired position in the song with the +/- buttons.

2)

 Press the new note on the keyboard (or the appropriate rest value

button on the numeric keypad).

3)

 Enter the new note value on the numeric keypad.  (Enter dotted

note or triplet first, if desired.)

4)

 At the “Delete?” prompt press the + button.  To cancel, press the -

button.

6

Listen to your new recording.

You can listen to the entire step recorded track at any time by pressing the

START/STOP button.  The track you are working on plays back (until

stopped), and returns to Step recording at the next position.

Keep in mind that this only plays the selected track.  To hear all tracks of

the song, exit from Step Rec (press the RECORD button), then press the

START/STOP button to start song playback.

7

Record to other tracks as desired.

To do this, simply repeat steps #4 - #6 above.  Make sure that when you

press the SONG MEMORY button corresponding to the desired track, the

track number in the display flashes.

8

Exit from the Record mode.

This operation is the same as step #9 of Realtime recording (page 83).