Yamaha TX-492 Owner's Manual - Controls and Their Functions
7
English
CONTROLS AND THEIR FUNCTIONS
FRONT PANEL
1
2
6
0
7 89
3
4
5
NATURAL SOUND AM/FM STEREO TUNER TX–492
POWER
A/B/C/D/E
MEMORY
EDIT
FM/AM
TUNING MODE
MAN'L/AUTO FM
AUTO/MAN'MONO
1
5
2
6
3
7
4
8
PRESET STATIONS
TUNING
DOWN
UP
1
POWER switch
Press this switch to switch the power on. Press it again to
switch the power off.
2
Display panel
Shows station frequencies and various information. (Refer to
the next page for details.)
3
Remote control sensor
Receives signals from a remote control transmitter provided
with a YAMAHA amplifier or receiver.
4
PRESET STATIONS buttons
Select a preset station number (1 to 8).
5
TUNING DOWN and UP buttons
Used for tuning. Press the “UP” button to tune in to higher
frequencies, and press the “DOWN” button to tune in to lower
frequencies.
6
A/B/C/D/E button
Press this button to select a desired group (A–E) of preset
stations.
7
MEMORY (MAN’L/AUTO FM) button
When this button is pressed, the MEMO indicator flashes for
about 5 seconds. During this period, press the desired
PRESET STATIONS button to enter the displayed station into
the memory.
When this button is pressed and held for about 3 seconds, the
automatic preset tuning begins. (Refer to page 11 for details.)
8
EDIT button
This button is used to exchange the places of two preset
stations with each other.
9
FM/AM button
Press this button to switch the reception band to FM or AM.
0
TUNING MODE (AUTO/MAN’L MONO) button
Press this button to switch the tuning mode to automatic or
manual. To select the automatic tuning mode, press this
button so that “AUTO” lights up on the display. To select the
manual tuning mode, press this button so that “AUTO” goes
off.