Z-BEN D700 Series User Manual - page 31
4.5.7 Upgrade
Picture 4.37 upgrade Picture 4.38 hard disk information Code stream statistics
【Upgrade】choose USB interface.
【upgrade file】choose the file which needs upgraded.
4.6 System information
4.6.1 Hard disk information
Display the hard disk state: hard disk type, overall capability, residual capability, the recording time and so on.
Clue:
means that the hard disk is normal. X means that the hard disk is broken-down.- means that there is no hard disk. If the user need to change the
damaged hard disk, you must shut down the DVR and take up all the damaged hard disks then install a new one.
* behind serial number means the current working disk such as 1*. If the corresponding disk is damaged, the information will display “?”.
4.6.2 Code stream statistics
Display the code stream(Kb/S)and hard disk capability (MB/H)in real time. It displays as the wave sketch map.
4.6.3 Log information
Look up system log according to the set mode.
Log information include: system operation, configuration operation, data management, alarm affair, recording operation,
usermanagement, file management and so on. Set the time section to look up and click the look up button. The log information will display as a List. (one page
is 128 items)Press Page up or Page down button to look up and press delete button to clear all the log information.
Picture4.40 log information Picture4.41 edition information
4.6.4 Edition information
Display the basic information such as hardware information, software edition, issue data and so on
4.7 Shut down system
Refer to chapter 3.5.8.
Network Hard Disk Videocorder Fast Operation manual
30