Z-Wave myGate Quick Start Manual - page 9
Version 0.1
8 June 2011
www.2myhome.eu
Controlling Command Classes
class: 0x71
COMMAND_CLASS_ALARM
class: 0x85
COMMAND_CLASS_ASSOCIATION
class: 0x20
COMMAND_CLASS_BASIC
class: 0x80
COMMAND_CLASS_BATTERY
class: 0x70
COMMAND_CLASS_CONFIGURATION
class: 0x72
COMMAND_CLASS_MANUFACTURER_SPECIFIC
class: 0x32
COMMAND_CLASS_METER
class: 0x8F
COMMAND_CLASS_MULTI_CMD
class: 0x8E
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION
class: 0x60
COMMAND_CLASS_MULTI_CHANNEL
class: 0x73
COMMAND_CLASS_POWERLEVEL
class: 0x75
COMMAND_CLASS_PROTECTION
class: 0x93
COMMAND_CLASS_SCREEN_ATTRIBUTES
class: 0x30
COMMAND_CLASS_SENSOR_BINARY
class: 0x31
COMMAND_CLASS_SENSOR_MULTILEVEL
class: 0x27
COMMAND_CLASS_SWITCH_ALL
class: 0x25
COMMAND_CLASS_SWITCH_BINARY
class: 0x26
COMMAND_CLASS_SWITCH_MULTILEVEL
class: 0x63
COMMAND_CLASS_USER_CODE
class: 0x86
COMMAND_CLASS_VERSION
class: 0x84
COMMAND_CLASS_WAKE_UP
class: 0x71 COMMAND_CLASS_ALARM
The Alarm Command Class is used to receive alarm notifications and security related events from other
devices.
class: 0x85 COMMAND_CLASS_ASSOCIATION
The Association Command Class is used to configure devices to send notifications to the myGate.
class: 0x20 COMMAND_CLASS_BASIC
The Basic Command Class is used as a fallback mechanism when trying to communicate with devices that do
not support any of the Command Classes that are controlled by the myGate.
class: 0x80 COMMAND_CLASS_BATTERY
The Battery Command Class is used to obtain battery information from devices.
class: 0x70 COMMAND_CLASS_CONFIGURATION
The Configuration Command Class is used to configure device-specific settings. Refer to the manuals of the
device in question for more information.