1. DL manuals
  2. Z-Wave
  3. Measuring Instruments
  4. RPB11647BSB
  5. User manual

Z-Wave RPB11647BSB User manual

Summary of RPB11647BSB

  • Page 1

    1 p-m-o wireless home automation power meter outlet specifications model number: rpb11647bsb z-wave signal frequency: kr (920.9mhz, 921.7mhz, 923.1mhz) power: 220v, 60hz maximum load: 16a, 3200w range: up to 100 feet line of sight operating temperature: -10 ~ 40 o c product type: receptacle dimensio...

  • Page 2: Warnings And Cautions

    2 warnings and cautions switch the main power off when installing z-wave products. Do not exceed current 16 amp at all times. Do not disassemble the outlet. Switches are not guaranteed to remotely operate in certain circumstances such as radio shadow area. Z-wave enabled devices should never be used...

  • Page 3: Operations

    3 operations manual control p-m-o has only one operation button. The following operations are possible with the button. 1. Manually turn on: press and release the button. The green led indicator will turn on. 2. Manually turn off: press and release the button. The green led indicator will turn off. ...

  • Page 4: Wireless Range

    4 wireless range this device complies with the z-wave standard of open-air, line of sight transmission distances of 100 feet. Actual performance in a home depends on the numbers of walls between the remote controller and the destination device, the type of construction and the number of z-wave enabl...

  • Page 5: Troubleshooting

    5 operation is subject to the following two conditions: - this device may not cause interference. - this device may accept any interference, including interference that may cause undesired operation of the device. Troubleshooting cannot carry out add, remove or association 1. Confirm that the outlet...