Zem-1 gateway hub user manual.
Feature list z-wave plus gateway hub is universal controller to control home control group of notification sensor(door/window), on/off switch ,valve open/closed, and door lock - keypad remotely. Certification - kc : korean certification - z-wave plus z-wave - device type : central controller - role ...
Z-wave specifications device type : central controller role type : central static controller command class control supported application status association association group information crc16 device reset locally manufacturer specific power level security version z-wave plu...
Glossary device or node devices and nodes are all terms to describe an individual z-wave device. These are all interchangeable when setting up your z-wave network inclusion add a z-wave device to the network exclusion delete a z-wave device from the network remove to take a device out of a group, sc...
A. How to use android ui? 1. Operate the controller apk 2. Relevant ui page (below picture is example when switch/sensor/valve/door lock devices are included).
3. To do inclusion -. Click “setting” on ui page at #2 procedure -. Click ‘inclusion’ button and click ‘yes’ to run inclusion mode 4. To do exclusion -. Click “setting” on ui page at #2 procedure -. Click ‘exclusion’ button and click ‘yes’ to run exclusion mode 5. To do learn mode -. Click “setting”...
-. Click ‘learnmode’ button and click ‘yes’ 6. To do factory reset factory reset method & description of the situation to use the reset function. "if this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necess...
B. How to connect wifi? 1. Connect keyboard to usb port. 2. Control + c with keyboard 3. You must edit as below, if the name of the wifi network is “jin_test”. And password is 1234567890..
Open the wpa-supplicant configuration file in nano: pi@raspberrypi:~$ sudo nano /etc/wpa_supplicant/wpa_supplicant.Conf go to the bottom of the file and add the following: network={ ssid=”jin_test” psk=”1234567890” key=wpa-psk } 4. Now save the file, ctrl+o, enter and ctrl+x. 5. And sudo reboot or p...
- maximum nodes : 5 - description : z-wave plus lifeline product specifications product type iot controller(hub) rf frequency f c 29.3khz (f c =920.9 / 921.7 / 923.1mhz) rf operating distance up to 100m outdoor line of sight, in unobstructed environment hw composition zm5101 is used powered by adapt...
