Z-Wave ZEM-1 User Manual - page 7
Manual is about: Gateway Hub
of
10
-. Click ‘LearnMode’ button and click ‘Yes’
6. To do Factory Reset
Factory Reset method & Description of the situation to use the
reset function.
"If this controller is the primary controller for your network,
resetting it will result in the nodes in your network being
orphaned and it will be necessary after the reset to exclude and
re-include all of the nodes in the network.
If this controller is being used as a secondary controller in the
network, use this procedure to reset this controller only in the
event that the network primary controller is missing or
otherwise inoperable."
-. Click “Setting” on UI page at #2 procedure
-. Click ‘ZW_SET_DEFAULT’ button and click ‘Yes’ to do
controller factory reset