Z-World Fox LP3500 User Manual - page 136
Manual is about: C-Programmable Single-Board Computer
of
144
130
Fox (LP3500)
2. +K must be connected to an external power supply. A 0
Ω
resistor on the Prototyping
Board (R1) ties +K to VIN from the AC adapter and thus satisfies this requirement as
long as the LP3500 is connected to the Prototyping Board.
3. Open
DIGIN.C
with the
File
menu, compile it using the
Compile
menu, and then run
it by selecting
Run
in the
Run
menu.
4. The following display will appear in the Dyanamic C
STDIO
window.
5. When pressing pushbutton switches S1–S4 on the Prototyping Board you can change
the inputs for IN0–IN3 from a “1” to a “0.”
6. Similarly you can view a change to the inputs for IN0–IN15 from a “1” to a “0” when
you touch a wire connected to ground to IN0–IN15.