Z3 Technology MVPR-02 User Instructions

Manual is about: Multi-Channel H.264 HD Multimedia System

Summary of MVPR-02

  • Page 1

    User instructions multi-channel h.264 hd multimedia system high definition video processor module dm8107 rapid prototyping system model name: z3-mvpr-02 doc-usr-0006-01 manual version 1.0.3 software version 1.03.03 february 26, 2013 before attempting to connect or operate this product, please read t...

  • Page 2

    Z3-mvpr-02 v1.0.3 2 revision history version date change note author 1.0.0 10/12/12 original system nc 1.0.1 10/17/12 modify 6.4, 6.7, and 9.2 ps 1.0.2 01/14/13 photo changes and parts list mc 1.0.3 02/26/13 format changes mc __________________________________________________________________________...

  • Page 3: Contents

    Z3-mvpr-02 v1.0.3 3 contents 1.0 general information ............................................................................................................................. 4 1.1 preface ..............................................................................................................

  • Page 4

    Z3-mvpr-02 v1.0.3 4 1.0 general information 1.1 preface the z3-mvpr-02 is a compact 186mm x 88mm x 36mm high definition, low cost, network-enabled, software configurable encoder or decoder. The z3-mvpr-02 is the ideal solution for industrial video, digital signage & security, remote monitoring and h...

  • Page 5

    Z3-mvpr-02 v1.0.3 5 2.0 included parts list ___________________________________________________________________________________________ z3 technology, llc ♦ 100 n 8 th st, ste 250 ♦ lincoln, ne 68508-1369 u.S.A. ♦ +1.402.323.0702.

  • Page 6

    Z3-mvpr-02 v1.0.3 6 3.0 features • sd/hd resolutions up to 1920 x 1080, including 1080p60, 1080i, 1080p30 and 720p60 • standard definition encoding for isdb-t, dvb-h and other standards • encode to stream • decode from stream • video inputs: hdmi, component, composite • on-board video scaler provide...

  • Page 7

    Z3-mvpr-02 v1.0.3 7 4.0 operating controls rear view front view ___________________________________________________________________________________________ z3 technology, llc ♦ 100 n 8 th st, ste 250 ♦ lincoln, ne 68508-1369 u.S.A. ♦ +1.402.323.0702.

  • Page 8

    Z3-mvpr-02 v1.0.3 8 1 audio in 2 audio in 3 hdmi in 2 4 hdmi in 1 5 ypbpr in 6 ypbpr in 7 hdmi out 8 ethernet 9 sata 10 usb (2) 11 12 v power supply 12 power switch 13 serial port 14 ypbpr out 15 a/v out 16 status light 1 17 status light 2 18 sd card slot ____________________________________________...

  • Page 9

    Z3-mvpr-02 v1.0.3 9 5.0 system connections the system can be controlled via the web server on the z3-mvpr-02. It can also be controlled via the serial port. 5.1 pc setup initially, the simplest way to setup the networked pc to communicate with the z3-mvpr-02 is to put the pc on the same subnet as th...

  • Page 10

    Z3-mvpr-02 v1.0.3 10 5.2 web server - encoder note: if you use unicast on the encoder, you must also use unicast on the vlc receiver. If you use multicast on the encoder, you must also use multicast on the vlc receiver. 1. Power on the z3-mvpr-02 2. Wait one minute or until led “status 1” on the uni...

  • Page 11

    Z3-mvpr-02 v1.0.3 11 10. Status 2 ld should now be lit and the title in the top-right of the browser should now say “mve-02 encoder” as pictured here in the example. 5.3 local ip settings – encoder • in the local ip settings section type in your desired local ip settings • hit “save user” to save yo...

  • Page 12

    Z3-mvpr-02 v1.0.3 12 local netmask 255.255.0.0 default gateway 192.168.0.1 5.5 web server – decoder 1. Stop the encoder by pressing “stop encoder” on the server. 2. Press the “decoder” button next to “operating mode” to change the operating mode to decoder. The title in the top-right of the browser ...

  • Page 13

    Z3-mvpr-02 v1.0.3 13 5.7 decoder configuration options input selection input interface ethernet input format rtp, mpeg-2 ts rtp ip: port custom (example = 225.1.2.3:8888) decoder setup video codec h.264 audio codec aac, none output setup output interface hdmi video frame rate 50hz, 60hz local ip set...

  • Page 14

    Z3-mvpr-02 v1.0.3 14 6.0 streaming operation after connecting your video/audio source and configuring the z3-mvpr-02 encoder, hit “start encoder” so the status below says “status: running.” if you are using the serial command instead, type “s” to start streaming. The way to set up vlc as your stream...

  • Page 15

    Z3-mvpr-02 v1.0.3 15 7.0 dynamic bit-rate & frame-rate change the dynamic bit-rate and frame-rate control will take effect, if you change *only* the following parameters: video bit rate frame decimation after the video bit rate and frame decimation rate have been configured to your preferred setting...

  • Page 16

    Z3-mvpr-02 v1.0.3 16 8.0 appendix a: serial control note: please only use the serial control if you are experiencing difficulties with the web server. Plug-in a db-9 serial cable from the z3-mvpr-02 to your pc set up teraterm on the pc for 115k, 8, n, 1, n, 1ms/char, 50ms/line connect to the proper ...

  • Page 18

    Z3-mvpr-02 v1.0.3 18 l – local netmask 192.168.0.1 m – default gateway 192.168.0.1 ___________________________________________________________________________________________ z3 technology, llc ♦ 100 n 8 th st, ste 250 ♦ lincoln, ne 68508-1369 u.S.A. ♦ +1.402.323.0702.

  • Page 19

    Z3-mvpr-02 v1.0.3 19 9.0 updating firmware 9.1 web page - locate the upd-z3-mvpr02-v1.03.03.Img file on your z3 server user account - save the file on your pc where it can easily be found - follow steps 1 through 7 in section 6.2 web server - encoder - on the web menu, next to “firmware version”, hi...

  • Page 20

    Z3-mvpr-02 v1.0.3 20 10.0 troubleshooting no video is usually caused by networking issues. O first: check ip address and netmask. Ping pc from z3-mvpr-02 and ping z3-mvpr-02 from pc. Use direct connection from z3-mvpr-02 to pc without router/customer network. Once video connection is established, th...