Z3 Technology MVPR-02 User Instructions - page 11
Z3-MVPR-02 V1.0.3
11
10. Status 2 LD should now be lit and the title in the top-right of the browser should now say “MVE-02
Encoder” as
pictured here in the example.
5.3 LOCAL IP SETTINGS – ENCODER
• In the Local IP Settings Section type in your desired Local IP settings
• Hit “Save User” to save your desired settings
• Power cycle the Z3-MVPR-02
•
The new IP settings will now take effect
5.4 ENCODER CONFIGURATION OPTIONS
Encoder Setup
Video Source
HDMI1/2, Component1/2, Composite1/2
Audio Source
Automatic, Analog
Audio Codec
AAC-LC ADTS, G.711, None
Video Resolution
Follow Input, De-Interlace Input
Rate Control
CBR, VBR
Video Bit Rate
Custom
Video Profile
Baseline, Main, High
Gop Size
10, 12, 15, 25, 30, 50, 60, 100, 120, 200, 240
Frames
Video Burst Size
150, 200, 300, 400, 500, 1000, 1200, 1400, 1600,
1800, 2000 ms
Output Setup
Output Interface
Ethernet
Video Passthru
HDMI, SDI
Output Format
RTP, MPEG-2 TS
Dest IP Address
192.168.X.XX (Use IP address of your PC)
Dest Port
8888
PID Audio, Video, PCR
Custom
Local IP Setup
Local IP Address
192.168.X.XX
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
th
ST, STE 250
♦ Lincoln, NE 68508-1369 U.S.A. ♦ +1.402.323.0702