Infrared multiscan thermometer • quickly measures body temperature • infrared non-touching for liquids, food or other surfaces.
E . A turns off durable r viewing s versatile easy to clean readings before changing batteries. O +/- 0.4˚f (+/-0.2˚c)..
T ase t t t 1. The multiscan thermometer is a very delicate electronic device. Only the sensor tip is water resistant, the device itself is not water resistant. Protect it against exposure to water and other types of liquids 2. Do not expose the thermometer to direct sunlight. 3. Store thermometer i...
Water resistant.
Battery will continue to dispose of the old batteries properly, and according to your local regulations. Warning: • use only fresh batteries of the required type and size. • the batteries may explode if mistreated. Do not attempt to recharge or disassemble the batteries. • depleted batteries are to ...
The multiscan thermometer is a delicate electric device designed for reading either body temperature within the inner ear or for reading the temperature of liquids, foods, or other surfaces. Body temperatures: when reading the inner ear body temperature, accurate and reliable readings are obtained b...
As soon as the m1 or m2 is chosen, the last measured temperature reading will appear on the display. Measuring temperatures 1. Press power(scan) button and thermometer will turn on and immediately perform automatic calibration. (see fig. 1-1) 2. Selecting memory storage zone (m1 or m2) for temperatu...
Measuring surface temperatures temperature readings may also be taken to determine the temperature of an item (ie. Water, milk, formula, food, etc.) position the thermometer directly on the surface or within ¼” of surface, press button and release. The audio signal will confirm the reading. 4. When ...
7. Temperature scale of the infrared thermometer can be switched between celsius (see fig. 7-1) and fahrenheit (see fig. 7-2). To do so, simply turn the thermometer on. 1.) press and hold the scan button. 2.) while holding the scan button press and hold the mem button. 3.) release the mem button whi...
When s (see fig. 9). (see fig. 10)..
Non-medical.
Cleaning and maintenance water resistant and should be cleaned cleaning and maintenance.
1. Permanently indicating low temperatures - if the scan button is pressed before the sensor is placed correctly in the ear then the readings taken will be too low. - the sensor is dirty. Clean the sensor with a soft, damp cloth or with cotton swabs dipped in diluted alcohol. 2. Replace battery - re...
Zadrohs@zadrohs.Com www.Zadrohs.Com rev04202010
