Zadro Health Soultions THE01 Instruction Manual - page 8
As soon as the M1 or M2 is chosen, the last measured
temperature reading will appear on the display.
Measuring Temperatures
1. Press POWER(Scan) button and thermometer will turn on
and immediately perform automatic calibration. (see Fig. 1-1)
2. Selecting Memory Storage Zone
(M1 or M2) for temperature measurement
• Immediately after the automatic calibration function is
completed, the M1 (Memory 1) or M2 (Memory 2) symbols
will appear on the display (see figures 2-1 & 2-2)
• To choose a different memory zone from the one displayed,
quickly press the POWER (Scan) button immediately after
the start-up automatic calibration function and toggle
between the M1 and M2 zones.
As soon as the M1 or M2 is chosen, the last measured
temperature reading will appear on the display.
3.Measuring Body Temperature
Introduce the thermometer into the ear; it should be
positioned inside the ear in order to register the
temperature (see fig. 3-1). Press and release Scan button.
When you hear the audio signal remove the thermometer
and read the temperature display (see fig. 3-2)