Zagg Now Cam Instructions Manual - page 3

3

USING THE SPEAKER

Power and Pairing

Pairing your Now Cam is easy and only needs to be done once; after that the 

Now Cam will automatically pair with your devices when you turn it on. The Now 

Cam remembers multiple devices and does not need to be paired in order for 

the camera to work – pairing is for music only. 

1. Press and hold the Speaker Power/Control button for three seconds to 

turn your Now Cam speaker on. A tone will sound and the LED next to the 

camera lens will light red indicating it is powered on. 

2. The first time you turn your Now Cam speaker on, it will automatically 

enter pairing mode. This is indicated by the LED flashing red then blue 

every second. To pair your Now Cam with multiple devices, press and hold 

the power button for five seconds when you power it on to force it into 

pairing mode.

3. Access the Bluetooth® settings on your device and ensure your Bluetooth 

connection is on.

4. Your device’s Bluetooth menu will display “ZAGG Now Cam” as available 

for pairing. Select this option and complete any additional pairing steps 

according to your device. Another tone will indicate a successful pair and 

the LED will flash blue every seven seconds while paired.

a. If pairing is not successful after 60 seconds, your Now Cam speaker 

will stop searching for devices to pair with and the LEDs will stop 

flashing. When it is paired, a tone will sound if your Bluetooth 

connection is lost for any reason; if the connection is lost, the Now 

Cam will automatically begin searching for a device to pair with 

and will continue searching for 60 seconds. If no device is found, 

the LEDs will stop flashing and the Bluetooth function will turn off, 

though your camera will still work. To initiate pairing again, turn your 

Now Cam Speaker off and then back on. If you are pairing your Now 

Cam with a second device, press and hold the speaker power button 

for five seconds as described above.

5. When you are ready to turn your Now Cam speaker off, press and hold the 

Speaker Power/Control button for three seconds. A tone will accompany 

the LED lighting red to indicate your Now Cam speaker is off. Note: Your 

Now Cam speaker will automatically power off if it sits idle for 15 minutes. The 

camera will automatically power off if it sits idle for five minutes.

Camera dial