Zagg Now Cam Instructions Manual - page 6
6
TRANSFERRING DATA VIA WI-FI
TRANSFERRING DATA VIA MICRO USB
Once you’ve captured some amazing photos or videos, transferring them to your
mobile device is a breeze. Here’s how easy it is:
1. Ensure your Now Cam camera is powered on as described above.
2. Turn the camera dial so that the download icon is aligned with the red selection nub.
3. Open your device’s Wi-Fi settings and select “ZAGG Now Cam”.
4. Open the Zagg Now Cam app on your device.
5. Open the app’s Camera Roll.
6. Select which photos and videos you’d like to transfer by touching them.
A checkbox will appear on marked pictures and videos.
7. Touch the download icon on the app. Selected files will begin transferring
to your phone’s camera roll. Note: Photos and videos you have taken with
the Now Cam will only be viewable on the device when the camera dial is
turned to the download icon and the Now Cam is connected to your device
via Wi-Fi. Also, Wi-Fi transfer is primarily intended for images and short
videos. We recommend using the included micro USB cable to transfer
large files.
You can also quickly and easily transfer your photos and videos directly to your
computer using the included micro USB cable. Here’s how:
1. Connect the included micro USB cable to your Now Cam by lifting the
cover located next to the camera dial.
2. Connect the USB end of the included cable to your computer. Your camera
will automatically turn on.
1. Ensure your Now Cam camera is powered on as described above.
2. Turn the camera dial so that the video icon is aligned with the red selection nub.
3. Press the shutter button once.
4. A tone will indicate the camera is warmed up and recording. If you were
playing music when you begin recording, your music will mute until recording
stops; after you stop recording it will resume playing automatically.
5. While recording, the LED next to the camera lens will flash red every
second. Press the shutter button again to stop recording.