ZALMAN ATI Radeon HD 5830 User Manual - .Com
4
.COM
1) VGA RAM Heatsink Attachment
2) FET Heatsink Installation
Remove the film from the Thermal Tapes on the bottom of the RAM
Heatsinks and attach the Heatsinks to the VGA RAM.
For A Type RAM Heatsink, please
attach to both the RAM and FET.
FET
RAM
①
Remove the Double-sided Tape covers from the Rubber Washer and
attach to FET Heatsink.
▶
Clean the surface of the RAM with acetone or alcohol before attaching the RAM
Heatsinks.
▶
The bonding strength of the Thermal Tapes reaches 90% after 24 hours of curing.
Do not exert excessive force on the RAM Heatsinks during this period.
▶
Thermal Tapes are not reusable because they lose adhesiveness after their
initial application. Purchase new Thermal Tapes if the RAM Heatsinks need to be
reattached.
Caution
5. Installation
B type
A type
②
Apply Thermal Grease to the FET chipset while leaving enough Thermal
Grease for VGA chipset application.