ZALMAN CNPS10X Optima (2011) User Manual - .Com
4
.COM
English
4. Installation Requirements
1) Space Requirements
2) Air Guide Removal
3) Cooler Orientation
4) CPU and RAM interference check
The cooler’s installation requires an unobstructed space of 85mm(width),
132mm(length), and 152mm(height), with the CPU as a central reference point.
Please check if components such as ODDs and PSU protrude into the required
space.
Air guides on enclosures must be removed before the cooler’s installation since
they protrude into the cooler’s required space.
As shown in the diagram below, it
is recommended that the cooler be
installed so that air flows from the
cooler toward the enclosure’s rear
exhaust fan to be released.
* Recommended cooler orientation may
differ according to the motherboard
model.
Any RAM with a height taller than 44mm (1.75 ) will have interference with the CPU
cooler. Please check the height of your RAM modules prior to installation.
85㎜
152㎜
132㎜