1. DL manuals
  2. ZALMAN
  3. Fan
  4. CNPS7X LED+
  5. User Manual

ZALMAN CNPS7X LED+ User Manual

Summary of CNPS7X LED+

  • Page 1

    User’s manual cnps7x led+ www.Zalman.Com ver.150806 to ensure safe and easy installation, please read the following precautions product design and specifications may be revised to improve quality and performance. Intel socket 115x / 775 cpus amd socket fm2 / fm1 / am3+ / am3 / am2+ / am2 cpu&apus.

  • Page 2: .Com

    1 .Com precautions specifications components 1 2 3 ■ avoid inserting objects or hands into the fan while it is in operation to prevent product damage and injuries. ■ do not ingest the thermal grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If inge...

  • Page 3: .Com

    2 .Com installation requirements 4 space requirements the cooler’s installation requires an unobstructed space of 85㎜(width),104㎜(length) and 134㎜(height) with the cpu as a central reference point. Please check if components such as odds and psu protrude into the required space. Air guide removal ai...

  • Page 4: .Com

    3 .Com installation 5 clip support installation(socket 115x / 775) align the a-type clip support’s lever with the socket type and fasten to the motherboard with pushpins. Clear off any particles or residue from the cpu’s surface. Then spread a thorough layer of thermal grease on the cpu and the base...

  • Page 5: .Com

    4 .Com install the cooler on the clip support as shown in the picture and connect the lug slot of the clip on to the lug on the clip support. Then fasten the bolts on each side a few turns at a time. When reassembling the bolt, be sure to assemble only half way of the total length. Tip m/b connect t...

  • Page 6: .Com

    5 .Com socket fm2 / fm1 / am3+ / am3 / am2+ / am2 completely unfasten the 2 bolts already assembled on the clip and adjust the position to fit the amd socket. Install the cooler on the clip support as shown in the picture and connect the lug slot of the clip on to the lug on the clip support. Then f...