ZALMAN CNPS7X LED+ User Manual - .Com
of
6
4
.COM
Install the cooler on the Clip support as shown in the picture and connect the lug slot
of the clip on to the lug on the clip support. Then fasten the bolts on each side a few
turns at a time.
When reassembling the bolt, be sure to assemble only half way
of the total length.
Tip
M/B
Connect the cooler’s 4-pin connector to the
motherboard’s CPU Fan Header.
Please make sure that PWM Control Mode is activated in the motherboard’s
BIOS settings.
Caution
AMD Socket FM2 / FM1 / AM3+ / AM3 / AM2+ / AM2
Clear off any particles or residue from the CPU’s surface. Then spread a thorough layer
of Thermal Grease on the CPU and the base of the cooler.
AMD Socket