1. Heatsink · dimensions(mm) : 126(l) x 110(w) x 45(h) · weight(g) : 290 · materials - dissipation fins : pure aluminum - base: pure copper - heatpipe : pure copper 1 cautions on use and installation specifications components disclaimer) zalman tech co., ltd. Is not responsible for any damages due t...
2 explode view (usage as vga cooler).
3 explode view (usage as cpu cooler) intel socket 775 intel socket 775 amd socket am2/am2+.
4 installation procedure (usage as vga cooler) 4. Spring insertion on the fixing nut slowly turn the spring in counter clockwise motion so that thespring is correctly attached to the fixing nut. Note 1) the ends of the springs are of different diameters. Install the spring end with the smaller diame...
5. Vga cooler installation 1) insert the rubber rings a into the vga cooler’s nipples a. 2) install the nipple a-attached vga cooler on the vga card’s mounting holes. ※ the vga chipset must be positioned on the center of the vga cooler’s base. 3) simultaneously hold the vga cooler and the vga card w...
6 installation procedure (usage as cpu cooler) ※ ※ the following installation sequence must be followed. (1. Removal of motherboard from case → 2. Removal of pre-installed coolers and installation hardware → 3. Thermal grease application → 4. Installation of intel/amd clip → 5. Installation of nippl...
7 5. Installation of nipple b install the short end of nipple b onto the clip that was previously installed onto the vf2000. (note) the nipples must be tightened by hand. Using tools to tighten the nipples may damage the tips of the nipples .Please take extra precaution when fastening the nipples. 6...
8. Motherboard installation install the motherboard (with the vf2000 installed) into the case. After the motherboard is installed, please check for interferences with the components such as the psu, odd etc.. 9. Fan power cable connection please refer to “7. Fan power cable connection” on page 5. 8.
