ZALMAN ZM-WB3 Gold User Manual - page 6
※
The specifications of any product may change without prior notice to improve performance.
5
2) Intel Pentium 4 - 478
① Applying Thermal Grease
Clean off particles and residue then spread a
generous amount of Thermal Grease thoroughly
on top of the CPU.
② Installing the Clip Supports for Socket 478
Install the Clip Supports for Socket 478 on both
sides of the Retention Guide as shown in the
diagram on the right.
③ Installing the Grips and Bolts
Interlock the L-type Grips with the Clip.
Insert the two Bolts into the inner holes of the Grips.
④ Installing the CPU Water Block
Set the CPU Water Block at the center of the CPU.
Screw the Bolts in slightly, then tighten each Bolt a
few turns at a time while alternating between the
two until the Clip Supports are completely pressed
against the Grips.
CPU (IHS)
Thermal Grease
Clip Support for Socket 478
Retention Guide
Bolt
Grip (L-Type)
Inner Hole
CPU Water Block
Grip (L-Type)
Clip Support for
Socket 478