ZANKER Washer-dryer Installation And User Instructions Manual - Operating Instructions
OPERATING INSTRUCTIONS
F
or each wash ensure that:
• The water supply connections are secure *, the tap is turned on (Fig. 10) and the
discharge hose is positioned correctly.
• The programme selector (P) is in the stop position (STOP).
• Then, with dry hands, insert the plug in the power socket (Fig. 11).
• Sort the washing into fabrc types **.
• Check that there are no objects in the pockets of the clothing to wash which may
damage the fabric, washing machine or filter.
• Open the door (Fig. 12).
• Load the wasfhing in the machine and close the door.
N.B. When using liquid detergent (recommended for programmes without
pre-washes), insert the detergent cup supplied (Fig. 13) and follow the
instructions on the packet.
Remember to remove the liquid detergent cup when using soap powder (Fig. 14).
When filling the soap powder container, each product poured into its respective
section must not be allowed to overflow. Should the detergent enter the softener
section, the washing will be rinsed in soapy water, leaving white marks. Vice
versa, if the softener enters the detergent section during the washing cycle,
efficiency will be impaired.
• Add the reduced lather detergent and softener (if required) specially made for
automatic washing machines). For the dosage, refer to the instructions on the
packet. In the case of soft water, reduce the dosage.
N.C. Excessive use of softener may damage the fabric.
• Close the soap powder container (Fig. 15).
Warning! Do not remove the soap powder container while the machine is
in operation, as this may cause water to spill out.
• Select the most suitable programme and correct temperature from the programme
table***.
• Pre-set using the "Adjustable thermostat (T) and programmer" (P) knob.
Warning!
Do not rotate the programmer knob (P) in an anticlockwise direction (Fig. 16).
6
* See "Water connection" (page 4)
** See "Clothing symbols" (page 5)
*** See Program tables (page 11-12)
Fig.10
Fig.11
Fig.12
Fig.13
Fig.14
Fig.15
Fig.16
Fig.17
HIGH SPEED