ZANKER ZKG 8408 Instruction Booklet - Installation

41

INSTALLATION

If this appliance featuring magnetic door seals is to 

replace an older appliance having a spring lock 

(latch) on the door or lid, be sure to make that 

spring lock unusable before you discard the old 

appliance.

This will prevent it from becoming a death-trap 

for a child.

Positioning

The appliance should be installed well away from 

sources of heat such as radiators, boilers, direct 

sunlight etc.

Best performance is obtained with ambient 

temperature between +18

°

C and +43

°

C (class T); 

+18

°

C and +38

°

C (class ST); +16

°

C and +32

°

C (class 

N); +10

°

C and +32

°

C (class SN).

The class of your appliance is shown on its rating 

plate.

For building into kitchen units follow the special 

“Building-in” instructions given.

Important

The appliance must be earthed.

The power supply cable plug is provided with a 

contact for this purpose.

If the domestic power supply socket is not earthed, 

connect the appliance to a separate earth in 

compliance with current regulations, consulting a 

specialist technician.

The Manufacturer declines all responsibility if the 

above safety precautions are not observed.

This appliance complies with EEC directive 

number 87/308 of 2/6/87 relative to radio 

interference suppression.

This appliance complies with the following 

E.E.C. Directives:

- 73/23 EEC of 19.2.73 (Low Voltage Directive) and 

subsequent modifications;

- 89/336 EEC of 3.5.89 (Electromagnetic 

Compatibility Directive) and subsequent 

modifications.

Cleaning the interior

Before using the appliance for the first time, wash the 

interior and all internal accessories with lukewarm 

water and some neutral soap so as to remove the 

typical smell of a brand-new product, then dry 

thoroughly.

Do not use detergents or abrasive powders, as these 

will damage the finish.

GB