ZANKER ZKG 8408 Instruction Booklet - page 7

43

Press in the joint covers between the appliance and 

the kitchen unit.

Apply covers (B) on joint cover lugs and into hinge 

holes.

Position the runners (H) at the top and bottom of the 

inside of the kitchen unit as shown in Fig. 6 and mark 

the position of the external holes.

After preparing the holes, screw the runners to the 

kitchen unit door using 3.5x16 mm screws.

Open both the appliance door and that of the kitchen 

unit to approx. 90

°

.

Place the little plates over the runners. Hold the doors 

of the appliance and the unit together and mark the 

holes.

Fig. 4

Fig. 5

Fig. 6

Fig. 7

D724

D726

B

D094

20mm

H

8mm

PR34