Zanussi DWS 697 Instruction Booklet - page 7

28

Rinse aid 

Rinse aid is automatically added during the last rinse,

ensuring thorough rinsing, spot and streak free drying.

The dispenser, which is positioned inside the door,

holds about 110 ml of rinse aid, which is sufficient for

16 - 40 dishwashing programmes, depending upon the

dosage setting.

Filling with rinse aid

1. Open the container by turning the lid (A) 

anticlockwise.

2. Add the rinse aid until the container is completely 

full. The indicator (B) will be completely dark.

3. Top up the rinse aid when the indicator (B) 

becomes clear.

Ensure that the lid is closed after every refill.

Do not put liquid detergent in the rinse aid department.

Clean up any rinse aid spilt during filling with an

absorbent cloth to avoid excess foaming during the

next wash.

Adjusting the dose 

According to the finish and drying results obtained,

adjust the dose of rinse aid by means of the 6 position

selector (C) (position 1 minimum dosage, position 6

maximum dosage).

Start from position 3.

Gradually increase the dose if there are drops of water

or lime spots on the dishes after washing. Reduce it if

there are sticky whitish streaks on the dishes.

BRI01en

BR01

A

m

ax

6 5 4 3

2

1

B

BR03

BR02

C

m

ax

6 5 4 3

2

1