- DL manuals
- Zanussi
- Hob
- ZGL 646
- Instruction Booklet
Zanussi ZGL 646 Instruction Booklet
Summary of ZGL 646
Page 1
Gas hob zgl 646 instruction booklet please read this instruction booklet before using the appliance ro ru.
Page 2
2.
Page 3: About Installation, Cleaning
3 about installation, cleaning and maintenance • it is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations. • ensure a good ventilation around the appliance. A poor air supply could cause la...
Page 4: Contents
4 contents this appliance complies with the following e.E.C. Directives: - 73/23 - 90/683 (low voltage directive); - 89/336 (electromagnetical compatibility directive); - 93/68 (general directives) and subsequent modifications. Manufacturer: electrolux home products italy s.P.A. Viale bologna, 298 4...
Page 5: Using The Hob Correctly
5 burner minimum maximum diameter diameter large (rapid) 180 mm 260 mm medium (semirapid) 120 mm 220 mm small (auxiliary) 80 mm 160 mm using the hob correctly to ensure maximum burner efficiency, it is strongly recommended that you use only pots and pans with a bottom fitting the size of the burner ...
Page 6: Cleaning and Maintenance
6 cleaning and maintenance general cleaning wash the enamelled components with warm soapy water. Never use abrasive cleaners frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking away any built-up of food. Regularly wipe over the hob top using a soft cloth weel wrung out...
Page 7
7 this appliance, before leaving the factory, has been tested and studied by many experts and specialists, in order to give you the best results. Any repair work which needs to be carried out should be done with the utmost care and attention. For this reason we recommend that for any problem you con...
Page 8
8 the following instructions about installation and maintenance must be carried out by qualified personnel in compliance with the regulation in force. The side walls of the unit in which the hob is going to be installed, must not exceed the height of the working top. Avoid installing the appliance i...
Page 9: Gas Burners Rating
9 gas burners rating rapid burner 3,0 kw (g20) - 2,8 kw (g30/g31) semirapid burner 2,0 kw auxiliary burner 1,0 kw appliance class 3 category ii2h3b/p setting natural gas g20 - 20 mbar gas connection g 1/2" technical data hob recess dimensions length 550 mm width 470 mm.
Page 10: Metal Pipes
10 fo 0067 fig. 4 choose fixed connections or use a flexible pipe in stainless steel in compliance with the regulation in force. If using flexible metallic pipes, be careful they do not come in contact with mobile parts or they are not squeezed. Use the same attention when the hob is combinated with...
Page 11: Injectors Replacement
11 injectors replacement • remove the pan supports. • remove the burner's caps and crowns. • with a socket spanner 7 unscrew and remove the injectors (fig. 5), and replace them with the ones required for the type of gas in use (see table 2). • reassemble the parts, following the same procedu- re bac...
Page 12: Building In
12 fitting the hob to the worktop the hobs can be installed in a kitchen unit with an opening for insertion whose dimensions are shown in fig. 8. To install the hob, proceed as follows: 1) remove the pan supports, the burners caps and crowns and turn the hob upside down. 2) place the sealing gasket ...
Page 13: Kitchen Unit With Door
13 a) removable panel b) space possibly useful for connections fig. 9 fig. 10 fig. 11 kitchen unit with door proper arrangements must be taken in designing the furniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution i...