Owner's manual before operating the unit, please read this manual throughly and retain it for future reference. Class a/b competition sq amplifier when too much just isn't quite enough zx-series competition class a/b competition class a/b competition class a/b.
Protect your investment note your information below for reference: model # serial # date purchased and: register your zapco product now at: www.Zapco.Com.
-2- mission statement committed to excellence zapco is dedicated to the pursuit of audio fidelity. Our prime objectives are to design and manufacture audio products of unsurpassed quality, to provide unparalleled support and service for these products, and to conduct business in a manner that will e...
Yes, please read this manual thoroughly. We wrote it to help ensure that you get the most from your investment in your zapco amplifier. If you find, after reading the manual, that you still have questions please feel free to give us a call at 1(800)47-force, or, drop us a note at power and wire gaug...
Gain setting matching your components for best sound proper gain setting is one of the most important factors in setting up a stereo system. At the same time, gain setting is most often done wrong. Turning up the gain of an amp is the very last thing you should ever do to a system. An amplifier is a...
Class-ab bridgeable car amplifier stable into 2 ohms bridged or 1 ohm stereo load pwm mosfet power supply input sensitivity (gain) control variable 18db octave crossover slope variable, selectable lp / hp crossover variable bass boost signal input and output rca connectors multi-way protection circu...
First make the ground connection, then +12v wire connection, and finally the remote connection. The +12v wire must always be fused at the battery for protection against possible damage. If you need to replace the power fuse, replace it with a fuse of the same value. Caution +12v power disconnect the...
Ch1 ch2 ch3 ch4 pwr prt remote 250hz 12db 30hz 0db lpf bass 500hz 50hz 0.2v 8v gain hpf input output input hpf lpf full 250hz 12db 30hz 0db lpf bass 500hz 50hz 0.2v 8v gain hpf channel 3/4 channel 1/2 hpf lpf full 250hz 12db 30hz 0db lpf bass ch1 ch2 ch1 ch2 pwr prt hpf lpf remote 500hz 50hz full in...
Gnd rem b+ ch2 ch1 ch1/2 bridged power input speaker outputs gnd rem b+ ch2 ch1 ch1/2 bridged power input speaker outputs gnd rem b+ ch2 ch1 ch1/2 bridged power input speaker outputs 1 channel bridged speaker impedance 2~8 ohms speaker impedance 4~8 ohms ch1-mono subwoofer 2 channel stereo ch2 ch1 s...
Ch2 ch1 ch4 ch3 ch1/2 bridged ch2 ch1 ch3/4bridged ch4 ch3 speaker outputs ch2 ch1 ch4 ch3 ch1/2 bridged ch2 ch1 ch3/4bridged ch4 ch3 speaker outputs 2 channel bridged zx-200.4 4 channel stereo 6 channel tri mode ch2 ch4 speaker impedance 2~8 ohms ch1 speaker impedance 4~8 ohms ch2-mono subwoofer ch...
510w x 2ch 840w x 2ch 1210w x 2ch 1730w x 1ch 2440w x 1ch >90db 30hz ~ 250hz 50hz ~ 500hz 0~12db 10hz ~ 30khz (+/-1db) 0.1% 60db 200mv~6v (+/- 5%) 190(w) x 60(h) x 660(l) 250a(external type fuse) -7- rated power output -rms power, 4 ohms stereo -------------------------------------------- -rms power...
Trouble shooting guide this power amplifier has protection features to prevent most forms of damage. If the unit senses excessive heat, short circuited speakers or overload, the protection indicators will be lit and the system will be turned off. Prior to checking the wiring for any fault, you shoul...
