- DL manuals
- Zapco
- Amplifier
- ZX-series
- Owner's Manual
Zapco ZX-series Owner's Manual
Summary of ZX-series
Page 1
Owner's manual before operating the unit, please read this manual throughly and retain it for future reference. Comp etition comp etition comp etition class d, competition bass/spl amplifier zx-series.
Page 2
Protect your investment note your information below for reference: model # serial # date purchased and: register your zapco product now at: www.Zapco.Com.
Page 3
-2- mission statement committed to excellence zapco is dedicated to the pursuit of audio fidelity. Our prime objectives are to design and manufacture audio products of unsurpassed quality, to provide unparalleled support and service for these products, and to conduct business in a manner that will e...
Page 4
Yes, please read this manual thoroughly. We wrote it to help ensure that you get the most from your investment in your zapco amplifier. If you find, after reading the manual, that you still have questions please feel free to give us a call at 1(800)47-force, or, drop us a note at power and wire gaug...
Page 5
Gain setting matching your components for best sound proper gain setting is one of the most important factors in setting up a stereo system. At the same time, gain setting is most often done wrong. Turning up the gain of an amp is the very last thing you should ever do to a system. An amplifier is a...
Page 6
Spl competiton class-d linkable mono block amplifier dual mos-fet pwm power supplies daisy-chain pass-through output double sided through hole epoxy pcb stable into 1 ohm 24db/oct variable crossover variable 24 db low pass (lpf) crossover variable 12 db bass boost equalization control variable 180 d...
Page 7
Pt link power input a gnd rem b+ b+ gnd power input b to +12v dc 250a x 2 (external type fuse) recommended ampere to remote turn-on from head unit head unit pt link jack to +12v dc zx-6.5kd ground battery ground pt link gnd b+ rem power input b+ gnd power input power input b+ gnd to +12v dc 250a x 3...
Page 8
Gnd b+ gnd gnd rem b+ b+ power input b power input a power input c b+ gnd gnd gnd rem b+ b+ power input e power input d power input f to +12v dc 250a x 6 (external type fuse) recommended ampere to remote turn-on from head unit head unit to +12v dc to +12v dc zx-26kd first make the ground connection,...
Page 9
Master slave master output slave input 0.2v 70hz 12db 90hz 250hz 180 10v 10hz 0db 30hz 30hz 0 remote speaker outputs gain sub sonic bass boost bass freq. Lpf phase shift input ch1 ch2 output ch1 ch2 daisy-chain pwr prt master slave master output slave input 0.2v 70hz 12db 90hz 250hz 180 10v 10hz 0db...
Page 10
Speaker outputs pwr prt input ch1 ch2 output ch1 ch2 0.2v 70hz 12db 90hz 250hz 180 10v 10hz 0db 30hz 30hz 0 speaker outputs remote gain sub sonic bass boost bass freq. Lpf phase shift wired remote control to input of additional amplifiers head unit zx-26kd rca connectors are used for the input from ...
Page 11
Master slave master output slave input 0.2v 70hz 12db 90hz 250hz 180 10v 10hz 0db 30hz 30hz 0 remote speaker outputs gain sub sonic bass boost bass freq. Lpf phase shift input ch1 ch2 output ch1 ch2 daisy-chain pwr prt master slave master output slave input 0.2v 70hz 12db 90hz 250hz 180 10v 10hz 0db...
Page 12
Master slave master output slave input 0.2v 70hz 12db 90hz 250hz 180 10v 10hz 0db 30hz 30hz 0 remote speaker outputs gain sub sonic bass boost bass freq. Lpf phase shift input ch1 ch2 output ch1 ch2 daisy-chain pwr prt master slave master output slave input 0.2v 70hz 12db 90hz 250hz 180 10v 10hz 0db...
Page 13
Speaker outputs input ch1 ch2 0.2v 70hz 10v 10hz speaker outputs remote gain sub sonic zx-26kd single voice 4 ohm load this amplifier is not supplied with bridged mode. If you use this amplifier in bridged mode, catastrophic damage will likely occur. Use the amplifier in mono mode only, in complianc...
Page 14
Speaker outputs input ch1 ch2 0.2v 70hz 10v 10hz speaker outputs remote gain sub sonic zx-26kd dual voice 2 ohm load + - + - 2 speaker outputs input ch1 ch2 0.2v 70hz 10v 10hz speaker outputs remote gain sub sonic 1 ohm load + - + - + - + - 2 subwoofer (4 single voice coil) subwoofer (4 single voice...
Page 15
Rated power output -rms power, 1 ohm (12.0v) ------ -rms power, 1 ohm (14.4v) ------ -rms power, 1 ohm (16.0v) ------ 2 same units linked in parallel -rms power, 2 ohm (12.0v) ------ -rms power, 2 ohm (14.4v) ------ -rms power, 2 ohm (16.0v) ------ signal to noise ratio ------------------ low pass f...
Page 16
Trouble shooting guide this power amplifier has protection features to prevent most forms of damage. If the unit senses excessive heat, short circuited speakers or overload, the protection indicators will be lit and the system will be turned off. Prior to checking the wiring for any fault, you shoul...