Zavio P5111 Quick Installation Manual - page 4
Install the hardware and connect all cables
a. Wall mounting and Ceiling mounting
a 1. Wall mounting
a 2. Ceiling mounting
b. Connect all cables
b1. Without Power over Ethernet (PoE) connection
(P5111/ P5116/ P5210)
- Connect the power adaptor to the IP Camera.
- Using a standard RJ-45 network cable, connect the IP Camera
to a normal Hub / Switch / Router.
b2. Power over Ethernet (PoE) (P5111/ P5210 Model )
- Using a standard RJ-45 network cable, connect the IP Camera
to a PoE-enabled Hub / Switch / Router.
b3. Wireless connection (P5116 Model )
- Connect the power adaptor to IP Camera.
- Connect to Wi-Fi.
b 2
b 1
1
b 3
Fix the camera to the bracket with two
supplied screws.
Fix the camera and bracket to the wall using
two screw and plastic anchors.
Fix the camera to the bracket with two
supplied screws.
Fix the camera and bracket to the ceil using
two screw and plastic anchors.
3