ZBoost Trio ZB575 User Manual - page 12
zBoost
®
TRIO ZB575 Manual
5
The setup must be in accordance with Article 810 of the National Electric Code (NEC). A listed
antennadischargeunitmustbeprovidedforthelead-incoaxialcableperNECarticle8.10.20orthe
shieldofthecoaxialcablemustbepermanentlyandeffectivelygroundedinaccordancewithNEC
article 8.10.21. Please consult a professional installer or electrician for more information.
Securing Cable with a Drip Loop
IftheExternalAntennaisplacedoutdoors,createadriploopwiththecoaxialcableatthepoint
where the cable enters the home through an outside wall. This can be done by twisting and
securing the cable into a loop (no less than
4” across) near the entry point. This will help
prevent moisture from gathering at entry
point and leaking into the home. Consult a
professional installer for more information.
Power Requirements
The Base Unit can be plugged into a standard 2 or 3 prong 110 VAC receptacle using the included
power supply. The power supply consumes less than 10W (less than 0.2A).For more information on
powerconsumption,see“TechnicalSpecifications”onpage11.
Warning
The zBoost TRIO base unit MUST only be used with
the provided power adaptor. Use of other power
adaptors will void the warranty and may damage the
unit. Use of other equipment is not FCC approved.
Coax Cable
Exterior Wall