ZBoost Trio ZB575 User Manual - page 13
zBoost
®
TRIO ZB575 Manual
6
FIRST: Mount the External Antenna
ChoosingthebestlocationfortheExternalAntenna
provides the best performance and the largest
area of improved signal. Determine the location
that provides the strongest signal (generally found
on the roof ) using the signal strength indicator on
your cell phone.
In the area of best signal, identify the best
location for attachment of the mounting bracket
– such as an attic cross or main beam and place
theExternalAntennaatornearthatlocation.
Important: Assemble the External Antenna
mounting bracket as shown below.
KeeptheExternalAntennaatleast3feetabove
anymetalsuchaswiring,A/Cducts,metalsiding,
truss plates, etc. When connecting the cable to
the antenna, run the cable straight down from the
antenna.Avoiddrapingthecoaxneartheantenna.
Antenna Bracket Assembly
IMPORTANT: IncorrectlymountingtheExternal
Antennatothemountingbracket(seefigureA)
willimpedeperformance.EnsurethattheExternal
Antenna is properly positioned in the mounting bracket
as pictured.
To mount antenna to a pole: Attach bottom of antenna
to pole bracket as pictured. Use U-Bolt to secure bracket
to pole and fasten.
To mount antenna to a flat surface: Attach bottom
of antenna to pole bracket as pictured. Secure bracket
to desired surface using provided screws. Use of the
Saddle and U-Bolt are not necessary for this option.
Setting Up Your zBoost Signal Booster
15 ft. of vertical
separation
15 ft. of vertical
separation
15 ft. of vertical
separation
Pole Bracket
Saddle
U-Bolt
Figure A
Note
AvoidplacingtheExternalAntennanearmetalsuchas
wiring,A/Cducts,metalsiding,trussplates,etc.
When connecting the cable to the antenna, run the
cable straight down from the antenna. Avoid draping
thecoaxneartheantenna.