Zebra 8516 Quick Start Manual
Without power pre-regulator
VEHICLE DC SUPPLY CONNECTIONS
Magmount and remote
external antenna
CONTENTS OF THE BOX
The VH10
This guide and any additional
documentation (dependent on order)
OVER
>
FRONT
Extension wire
Extension power cable
Cable kit CA1220 includes an extension power cable with additional lines to
connect to the Ignition Switch.
Cable kit CA1210 includes an extension power cable without lines for the
Ignition Switch.
Diode/choke assembly
Fuse assembly
DO NOT USE
Mounting hardware is packed separately, according to your order.
Adaptor cable with lines for
ignition switch
AC power adaptor
VH10 FEATURES
Display
SYM key
ENTER/Power key
UART RS-232 ports
BOTTOM
Power LED
Warning LED
Power button
Type B Micro-USB port (inside dome
plate - for service personnel only)
Function keys
Macro keys
Blue Modifier key
Antenna
(optional)
Orange Modifier key
Antenna
(optional)
Cable bay cover
Power cable
Audio jack
USB host port
DB9 screen blanking cable
Lines to ignition switch
(optional)
VH10 power cable
Vehicle DC power source
(12VDC to 48VDC nominal)
Positive
Negative
connection
connection
Extension power
cable
Extension wire
Fuse
DB9 cable
Lines to screen-blanking
sensor (optional)
Caution: Do not use the
diode/choke assembly in the
Extension Power Cable kit
Beeper
BACK
Vent
Ground lug
Powered USB host port
Unused ports should be covered with dust caps.
Strain
relief
brackets
Cable bay cover removed
Function keys and
Macro keys
PORTS
OPTIONAL PARTS