Zebra 8516 Quick Start Manual - page 2
GETTING STARTED
1
2
3
5
Attach the mount to the VH10 and to the vehicle. Refer to the
mounting instructions in the VH10 Vehicle-Mount Computer User
Manual, PN 8000275.
Position the VH10 in the vehicle.
Narrowband radio: Attach the antenna, following the instructions
on the package.
Wi-Fi radio: Connect the external magmount antenna,
if needed.
6
7
8
4
Antenna connector
Mount the antenna so
that it is vertical
Connect peripherals to the
VH10, placing their cables into
the strain relief brackets inside
the cable bay. Then replace
the cover.
Connect the VH10 to the vehicle DC supply.
To power the unit
on or off, press the Power button located at
the top of the unit.
Calibrate the touchscreen, if necessary.
Configure the radio, software, and peripherals. Refer to the VH10
Vehicle-Mount Computer User Manual, PN 8000275.
8000282-003 Rev. A March 2016
Vehicle DC power source
(48VDC to 72VDC nominal)
Power pre-regulator
Extension power cable
Extension wire
(without ignition switch)
Positive
Negative
connection
connection
Fuse
VH10 power cable
DB9 cable
Lines to screen-blanking
sensor (optional)
Lines to ignition switch (optional)
Caution: Do not use the
diode/choke assembly in the
Extension Power Cable kit
(Model PS1370)
With power pre-regulator
VEHICLE DC SUPPLY CONNECTIONS
Strain
relief
brackets
Bottom of VH10 with cable bay
cover removed.
Cable bay
Cable bay
cover
Zebra reserves the right to make changes to any product to improve reliability,
function, or design.
Zebra does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise
under any patent right or patent, covering or relating to any combination, system,
apparatus, machine, material, method, or process in which Zebra products might be
used. An implied license exists only for equipment, circuit, and subsystems contained
in Zebra Products.
Warranty
For the complete Zebra hardware product warranty statement, go to:
http://www.zebra.com/warranty
Zebra Technologies Corporation
Lincolnshire, IL, U.S.A.
http://www.zebra.com
Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many
jurisdictions worldwide. All other trademarks are the property of their respective
owners.
© 2016 Symbol Technologies, LLC
VH10 VEHICLE-MOUNT COMPUTER
Quick Start Guide
This guide covers the following models:
- 8516//VH10
- 8516N/VH10N
CAUTION: Do not use tools to secure
connector thumbscrews. Only tighten
by hand.