- DL manuals
- Zebra
- Printer
- Cameo series
- User Manual
Zebra Cameo series User Manual - Li72 Models
15
UMAN-Charge
Do not attempt to charge batteries with the LI72 while
printing. Attempting to print while charging can result in improp-
erly charged batteries.
LI72 Models
Model number
Country of use
V.A.C.
AT15759-1
U.S. & Japan
110
AT15759-2
U.K.
220
AT15759-3
Euro
220
AT15759-4
Aust
220
AT15759-6*
(varies w/line
varies
cord supplied)
*This model is suppled with an IEC socket to allow use as an in-
line charger. Connection to A.C. supply is via a line cord
configured with an A.C. plug for the country of intended use.
Summary of Cameo series
Page 1
Document: chargers_f.Pdf rev. F, july, 2002 mobile printer chargers mp series, rp series encore series, cameo series, ql series user’s manual.
Page 2: Proprietary Statement
Proprietary statement this manual contains proprietary information of zebra technologies corporation. It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any o...
Page 3: Contents
Contents introduction ................................................................................... 4 mp and rp series printers ............................................................................ 4 cameo and encore series ..................................................................
Page 4: Introduction
Uman-charge 4 introduction this manual covers the use of all chargers currently of- fered by zebra for use with mp, rp, encore, cameo and ql series mobile printers. Mp and rp series printers the mp series (mp5022, mp5030, mp5033 and mp5044) and the rp3 use nicad batteries, which require periodic “co...
Page 5: Ucli72-4 Quad Charger
5 uman-charge fault fast c harg e ful full c harg e fault fast c harg e read y continued on next page ucli72-4 quad charger description the ucli72-4 quad charger is designed to charge up to four lithium-ion (lion) ql series mobile printer battery packs simultaneously. The unit is supplied with an ex...
Page 6
Uman-charge 6 full c harg e fault fast char ge read y note the orientation of the battery pack. Slide the battery pack into the charging bay until it stops. Then rock the battery pack back until it snaps into place. The amber indicator directly under the battery being charged will turn on if the bat...
Page 7
7 uman-charge fault fast char ge fault fast char ge fault fast char ge read y pow er full c harg e read y full c harg e read y full c harg e refer to the chart below for a quick reference: amber green battery status on off charging on flashing o.K. (80% charged) off on completely charged flashing fl...
Page 8: Charging Times
Uman-charge 8 charging times ql220/320 ql 420 (at16004-1) (at16293-1) 80% charge 1.25 hrs 2.5 hrs. Full charge 2.5 hrs 5 hrs. These times are for completely discharged batteries. Bat- tery packs which are still partially charged will take less time. The quad charger has a safety feature which stops ...
Page 9: Ucn72-4 Quad Charger
9 uman-charge continued on next page ucn72-4 quad charger description the ucn72-4 quad charger is designed to charge up to four nimh encore and/or cameo series batteries simulta- neously. Battery packs may be charged externally or while plugged into the printer. The unit has switch selectable 110/ 2...
Page 10: Ucn72-4 Part Numbers
Uman-charge 10 the battery pack to be charged. The charge indicator near the cable will either light steadily, or start to blink. On a fully charged battery, the indicator will go out after a few minutes, indicating a fully charged condition. On batteries in need of charging, the indicator will stop...
Page 11: Description
11 uman-charge ncxx04 series quad charger/conditioners description nc series quad chargers sequentially charge and/or condition up to 4 batteries. Charge time is approximately one hour per battery depending on battery’s state of charge. Condition cycle times vary with both the battery’s state of cha...
Page 12: Conditioning Battery Packs
Uman-charge 12 conditioning battery packs in order to extend battery life, battery packs should be conditioned periodically. The nc series quad chargers are equipped with a "condition" mode, which fully discharges a battery pack followed by a full charge cycle. Conditioning nicad battery packs once ...
Page 13: Ncxx04 Part Numbers
13 uman-charge the communications port should only be used by factory authorized personnel. Ncxx04 part numbers part number* used on charge method dc12127-1x mp5020/22 battery drop-in dc12255-1x mp5030/33 battery drop-in dc12363-1x mp5030,rp3 cable dc12248-1x mp5044 battery drop-in dc12464-2x rp3 ba...
Page 14: Li72 Wall Charger
Uman-charge 14 charging trickle charging fault condition li72 wall charger description the li72 is a wall mounted fast charger with universal 110 to 230, 50-60 hz. Vac input. Multiple a.C. Plug configura- tions comply with most interna- tional standards. This charger is used with the ql series print...
Page 15: Li72 Models
15 uman-charge do not attempt to charge batteries with the li72 while printing. Attempting to print while charging can result in improp- erly charged batteries. Li72 models model number country of use v.A.C. At15759-1 u.S. & japan 110 at15759-2 u.K. 220 at15759-3 euro 220 at15759-4 aust 220 at15759-...
Page 16: Ucn72 Wall Charger
Uman-charge 16 charging trickle charging temperature too high/low ucn72 wall charger description the ucn72 is a wall mounted fast charger with universal 110 to 230, 50-60 hz. Vac input. Multiple a.C. Plug configu- rations comply with most interna- tional standards. This charger is used with the enco...
Page 17: Ucn72 Models
17 uman-charge ucn72 models model number country of use v.A.C. At15244-1 u.S. & japan 110 at15244-2 u.K. 220 at15244-3 euro 220 at15244-4 aust 220 at15244-6* (varies w/line varies cord supplied) *this model is suppled with an iec socket to allow use as an in- line charger. Connection to a.C. Supply ...
Page 18: Description
Uman-charge 18 uc series charger/conditioner important: never charge or condition battery packs while attempting to run the printer. Description the uc series of charger/conditioners is designed to charge and condition individual battery packs used on the mp, rp, encore and cameo series of portable ...
Page 19: Uc Series Charger Models
19 uman-charge the condition cycle for a fully charged battery is approxi- mately 90 minutes. If the “charge ok” indicator blinks, disconnect the battery pack and wait until all the lights except the “power “ light go out. Reconnect the battery and repeat step 3. Uc series charger models base part n...
Page 20: Trickle Chargers
Uman-charge 20 trickle chargers description these compact, cost effective chargers are designed to charge individual battery packs. Typical charge time is 12 to 16 hours. Charging batteries plug the charge cable into the battery pack charger jack, and the charger body into the appropriate a.C. Wall ...
Page 21: Product Support
21 uman-charge product support contact the product support help desk at: zebra technologies corporation 30 plan way warwick, rhode island 02886.1012 usa telephone: +1 401.739.5800 fax: +1 401.732.7808 e-mail: risupport@zebra.Com ask for the help desk in europe: zebra technologies europe, ltd. Zebra ...
Page 22
Visit our website at www.Zebra.Com.