Zebra DS4800 Series Quick Start Manual - Troubleshooting
DS4800 Series Imager Quick Start Guide
11
Recommended Usage / Optimum Body Posture
Troubleshooting
AVOID EXTREME
WRIST ANGLES
AVOID REACHING
AVOID BENDING
Avoid Extreme Wrist Angles
Avoid Bending
Avoid Reaching
Indication
Resolution
Aiming dot does not appear
No power to imager
Connect imager to powered USB host
Aiming dot is disabled
Enable aiming dot
Imager decodes bar code but does not transmit data
Transmission or format error
Set the proper communication and conversion parameters
Invalid ADF rule
Program the correct ADF rules
Imager does not decode bar code
Imager not programmed for bar code type
Program the imager to read that bar code type
Bar code is unreadable
Ensure the bar code is not defaced; scan a test bar code of
the same bar code type
Bar code is out of aiming dot area
Move the aiming dot over the bar code
Scanned data incorrectly displayed on host
Host interface not configured properly
Scan appropriate host parameter bar codes
Region improperly configured
Select appropriate country and language encoding scheme