Zebra MDM9000 Quick Reference Manual - Requirements
4
MDM9000 Modem
Requirements
• for modem connection:
•
telephone number, IP address and DNS/WINS address information from
the dial-in server administrator
•
a dial-in account on the host system, including a user ID and password
•
an RJ11 modem cable
•
a functioning telephone jack that supports plug-in modems connected to the
local telephone system
•
setup of Country Codes to use the modem with the appropriate country’s
telephone network (refer to the mobile computer’s
Product Reference
Guide
).
• for communication:
•
an MC9000 Series mobile computer
•
Cable Adapter Module (CAM), Zebra p/n ADP9000-100R
•
Serial Adapter Cable (for communication via cradle),
Zebra p/n 25-63856-01R
•
Microsoft ActiveSync
•
setup of host computer and mobile computer (refer to the mobile
computer’s
Product Reference Guide
for detailed instructions).
Connecting the MDM9000 Modem
Connecting to the MC9000
To use the modem to provide data communication between the MC9000 and a
host computer remotely through a phone line:
1.
Insert the CAM onto the MC9000.
2.
Connect the male 15-pin connector on the modem cable to the female 15-pin
port on the CAM.
3.
Connect one end of the phone cord to the Line In port on modem, and the
other end to a wall phone jack.
CAUTION
Do not connect the modem's 15-pin connector into a VGA
port of a host computer.