Zeck Audio STAC CL8CT Owner's Manual - page 7
Pattern selection:
To change pattern press
Shift & Up
or
Down
. The display will change to the
next or last pattern number or function. The selections are:
Pattern 1 - 32
displayed as
01 - 32
Patterns
Sound to light
displayed as
SL
Sound to light
Soft chase
displayed as
SC
Slow dimming pattern
Auto Pattern
displayed as
AP
Runs through patterns 1 - 32
Patterns off
displayed as
PO
3/4 Channel mode:
To select 3 or 4 channel mode press
Shift & 3/4channel
. The display will dis-
play
3C
for 3 channel mode or
4C
for 4 channel mode. To revert back press
Shift &
3/4channel
again.
Fuse changing:
If one channel stops working,
disconnect the supply and r
emove the lid.
Always replace the fuses with same type and rating.
Do not connect the sup
-
ply until the lid has been r
eplaced.
If the unit will still not work contact your
dealer.
3. Specification
Size
2U, 19“ rack, 17 cm deep
Weight
3 kg
Sound input
Via Jack 500 mV to 40 V pp
Max. load per channel
1000 W resistive or 600 W inductive
Max. load total
3100 W resistive or 2400 W inductive
Fuses
4 pcs. 5 A and 1 pcs. 0.5 A quick blow
Triacs
BTA08 600TW
Power supply
230V
The
CL 8 CT
conforms to EN 60730-2-1, EN 60335-1, EN 50082, EN 55014.
4. Warranty
The CL 8 LE is backed by a 2 year warranty from the date of purchase. Each unit
must be returned for servicing with the original receipt (which therefore should
be always kept).