Zee Z-3020 Installation Manual And User's Manual - page 4
of
13
4
Install the Hardware and Connect All Cables
Wall mounting and Ceiling mounting
1. Use the 3 supplied screws to fix the base plate to a flat surface.
2. Loosen the lock ring to adjust the desired angle of the camera.
3. Tighten the lock ring.
Connect cables and power supply
1. Connect the power adapter to the IP Camera.
2. Use a standard RJ-45 network cable to connect the
IP Camera to the Network connector port on the
camera.
System Specifications
CPU
Intel Atom 330 or above
(1M cache, 1.6GHz, 533MHz FSB)
RAM
1G or above
Screen Resolution
1280 x 720 recommended
Browser
IE, Firefox, Chrome, Safari. Version as below
Java Version
Java 7u11 or above