Zehnder Rittling ComfoControl Ease User Manual - page 6
6 - EN
If an extractor hood is not
registered or is not supported,
then the Temporary High Setting
will be activated by a short press
of the button.
While the open fire programme is
activated, or when an ComfoCool
is registered, the supply and
exhaust fan cannot be manually
switched off.
Not all CC Ease operating
functions are supported by each
ventilation system.
The CC Ease allows the following
functions to be programmed and
displayed:
■
Reading and setting the day and time;
■
Reading and setting the comfort
temperature;
■
Reading and setting the ventilation
volume;
■
Activating the temporary high setting;
■
Switching the extractor hood on/off
(optional);
■
Switching the supply and exhaust fan
on/off (optional);
■
Setting a personal ventilation
programme;
■
Setting additional ventilation
programmes/options in the P menus.
A concise explanation of the above listing
is given in the paragraphs below.
If no buttons are used for 30
seconds, then the CC Ease will
automatically return to the main
screen.
2.1 Time and date settings
1. Press longer than 2 seconds.
- Wait until the day, e.g. “Sa”, starts
flashing.
2. Select the required day using
or
.
3. Press
.
- Wait until the hours, e.g. “12”, flash.
4. Select the required hour using
or
.
5. Press
.
- Wait until the minutes, e.g. “00”,
flash.
6. Select the required minutes using
or
.
7. Press to save the settings and
return to the main screen.