Zeiss LSM 700 Quick Manual - page 19
01/2013
17
Settings for track configuration in Channel mode
x Select Channel mode if necessary (Fig. 17).
x Click on the LSM button in the light path tool (Fig. 17).
The Light Path tool displays the selected track configuration which is used for the scan procedure.
x You can change the settings of the light path tool using the following functional elements:
Activation / deactivation of the excitation wavelengths (check box) and
setting of excitation intensities (slider). If necessary open the Laser Control
tool (see above).
Activation / deactivation (via check box) of a channel (PMT1, 2), the dye to
be detected with this channel (dye), and a color for display (LUT) of the
acquired information.
x The system will automatically: a) select the most
appropriate position of the secondary dichroic
mirror and b) choose the suitable emission
filters for the dye combination entered for
PMT 1 and PMT 2.
x The emission spectra and the laser lines used of
the selected dyes are displayed in the light path
tool.
x Click the Laser icon to select the laser lines and
set the attenuation values (transmission in %) in
the light path tool.
x The Detection Bands & Laser Lines are also
displayed in a spectral panel (Fig. 18) to visualize
the activated laser lines for excitation (vertical
lines) and activated detection channels (colored
horizontal bars).
x For storing a new track configuration open the
Channels tool in the Acquisition Parameter
tool group, click
and enter a desired name
in the box (Fig. 19). Press OK to confirm.
x For loading an existing configuration click on
and select a configuration from the list box.
x For deleting an existing configuration click
and select it from the list box. Press Ok to
confirm the deletion.
Fig. 18
Detection bands & Laser lines
display
Fig. 19
Track Configurations window