Zektor CVS4 Supplement Manual - page 8
2
CVS4 Component Video Switch
CVS4 Component Video Switch
P + Toggle power.
P ? Query for current setting.
P Query for current setting.
Response String:
=Pn
Where:
n = Current power status.
Note: For backward compatibility with the HDS4.2, there is no space after the command in the
response string.
Output Mapping
Maps the CVS4’s output to a selected input.
O inSet output to input ‘in’.
O ? Query for current setting.
O Query for current setting.
Response String:
=O in
Where:
in = Current input being mapped to the CVS4’s output.
Channel Select (HDS4.2 Version)
Note: This command exists for backwards compatibility with the HDS4.2, use the “Output Map-
ping” command in new designs.
Selects the current CVS4 channel.
C inSelect channel ‘in’ (See Note 1).
C ? Query for current setting.
C Query for current setting.
Response String:
=Cin
Where:
in = Currently selected channel.
Note 1: If the CVS4 is off, this command will turn on power before selecting channel.
Note 2: For backward compatibility with the HDS4.2, there is no space after the command in the
response string.
Note 3: For backward compatibility with the HDS4.2, this response string is sent in the Asyn-
chronous mode when a channel status has changed. Future products will return the “Output
Mapping” Query Response string.
Front Panel Lighting Mode
Set the behavior mode of the front panel LEDs.
LM 0 Turn off front panel lights.
LM 1 Set the front panel lights to always DIM.
LM 2 Set the front panel lights to always BRIGHT.
LM 3 Set the front panel lights to AUTODIM after 4 seconds.
LM ?
Query for current setting.
LM
Query for current setting.
Response String:
=LM m
Where:
m = Current Lamp Mode setting
Front Panel Lighting Mode (HDS4.2 Version)
Note: This command exists for backwards compatibility with the HDS4.2, use the “LM” version of
this command in new designs.
Set the behavior mode of the front panel LEDs.
L 0 Set the front panel lights to be always DIM.
L 1 Set the front panel lights to be always BRIGHT.
L 2 Set the front panel lights to AUTODIM after 4 seconds.
L 3 Turn off front panel lights.
L ?
Query for current setting.
L
Query for current setting.
CVS4 Command Reference (Cont’d)
CVS4 Command Reference (Cont’d)