Zelmer 17Z017 User Manual - page 25
27
GW17-055_v01
Dear Customers!
Congratulations on your choice of our appliance, and
welcome among the users of Zelmer products.
In order to achieve best possible results we recommend
using exclusively original Zelmer accessories. They have
been specially designed for this product.
We urge that you read this user’s manual carefully. Special
attention needs to be paid to the safety precautions. Please
save this manual so it can be referred to in the future use of
the product.
Safety precautions and instructions on the
proper use of the electric kettle
Always abide by the following basic safety measures during
the operation of the electric appliance:
The kettle is intended for household use only.
●
Plug the kettle into a 220÷240 V alternating current
●
socket equipped with an earth pin only.
The kettle type covered by this user’s manual brings
●
water to boil very quickly and draws up to 10 A of current
from the mains.
Check that the mains fuses used can cope with this level
●
of power consumption. While boiling water, unplug all
other appliances from this circuit.
Place the kettle on a stable, even and flat surface; the
●
connecting cord may not hang over the edge of the
surface on which the kettle is placed.
If the non-detachable part of the cord is damaged,
it should be replaced by the producer or at a proper
service point or by a qualified person in order to avoid
any hazards.
Repairs may only be undertaken by qualified staff.
Repairs not properly carried out may result in serious
injuries to the user. In case of malfunction, contact
specialized service centre.
The kettle can only be operated with the original power
●
base, each base is type-specific.
Do not fill the kettle beyond the maximum fill indicator
●
„
max
” – water might spatter out of the kettle.
Use the kettle for boiling water only.
●
Special attention is necessary when the kettle is used in
●
the presence of children.
Do not operate the appliance if the power cord is
●
damaged or the kettle body is visibly damaged.
Do not remove the plug from the outlet by pulling by the
●
cord.
Do not open the lid immediately after water has boiled
●
– steam might condense and appear on the exterior of
the kettle.
Do not place the kettle on or near hot objects.
●
Do not immerse the kettle or the power base in water
●
when filling or washing the electric kettle.
Be careful not to wet the plug of the connecting cord.
●
In the event that water gets into the inside electric
●
elements of the kettle, or onto the power base, carefully
dry these elements before plugging the kettle into the
mains.
Mind the steam coming out of the kettle while water is
●
boiling.
Do not operate the kettle when empty.
●
Do not use the kettle without a filter.
●
Do not use the kettle with the lid open – the automatic
●
shut off will not work then.
Allow the kettle to cool completely before cleaning it.
●
Do not use any abrasive cleaning agents such as
●
emulsions, creams, pastes, etc for cleaning the kettle
body. They might remove graphic information symbols
such as: scales, marks, warning signs, etc.
This appliance is not intended for use by persons
●
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not
●
play with the appliance.
The appliance is not intended to be operated by means
●
of an external timer or separate remote-control system.
Technical data
The technical parameters are given on the data plate of the
product.
2 liter capacity.
The ZELMER kettle meets the requirements of the standards
in force.
The appliance is compliant with the requirements of the following
directives:
The Low Voltage Directive (LVD) – 2006/95/EC.
–
Electromagnetic Compatibility (EMC) – 2004/108/EC.
–
The product is affixed with a CE Mark on the data plate.
Structure of the kettle
(Fig. A)
1
Spout
2
Kettle body
3
Dual water indicator
4
Revolving power base
5
Lid release button
6
On/off lever
7
Handle
8
Anti-deposit filter
9
Storage space for the connecting cord
Preparation of the electric kettle for
operation
Before the first use, wash the kettle inside (for washing
instructions see “Cleaning and maintenance”), fill it with
water up to the “max” level, and let it boil four times (use
fresh water each time) and wash again.
EN