Zelmer 887 User Manual - page 28
32
887-003_v01
Description
The meat mincer consists of:
1
Drive unit – each drive of the machine is adjusted to the
assembly of each of the mincing set and the shredder
produced by ZELMER. There are ventilation inlets inside
of the rear cavity of the 887 mo-tor compartment.
1a
Switch
1b
Lock button
Mincing set, which consists of:
2
Mincing chamber
3
Feed screw with assembled coupling
4
Double-side cutter
5
Screen with 4mm holes
6
ring collar
7
Food tray
8
Pusher
Equipment, which includes:
9
Screen with 8 mm holes
10
Screen with 2.7 mm holes
11
Sausage stuffer
A
12
Separator
13
Aperture plate
14
Disc
15
Noodles sieve
16
Vermicelli sieve
17
Pusher
Mechanical safety device for the motor
1
Scroll
2
Clutch
3
Screw M5x20
The meat mincer is equipped with mechanical protection,
which secures the motor against any damage – teeth of
the coupling break, when the meat mincer is overloaded
(f. ex. when bones have entered into the mincing chamber).
The broken coupling should be replaced with a new one:
unscrew the coupling from the feed screw,
●
remove the broken coupling,
●
put on the new coupling and screw it.
●
B
TYPES OF ZELMER MEAT MINCERS
Below, you can see an assortment of equipment anticipated for the meat mincers, which the user manual refers to.
Type
Accessories
Mincer unit No. 5 Mincer unit No. 8 Pasta and pastry
set
Shredder
Vegetable cube
cutter
Juicer
887.5
●
○
●
○
○
○
887.54
●
○
○
●
○
○
887.8
○
●
–
○
○
○
887.83
○
●
–
●
○
●
887.84
○
●
–
●
○
○
887.89
○
●
–
●
●
○
●
– basic accessories,
○
– additional equipment, which can be bought in shops, household appliances stores,
–
– unavailable accessories
Do not wash the metal parts in the dishwasher.
●
Aggressive cleaning agents used in these appliances
can cause darkening of the above-mentioned parts.
Wash them manually, with the means of traditional
dishwashing liquids.
Noise level (L
WA
):
77 dB/A
The appliance features double electrical insulation (Class II)
and does not require grounding.
ZELMER meat mincers meet the requirements of the
following applicable standards.
The meat mincer complies with the requirements of the
following directives:
Low voltage device (LVD) – 2006/95/EC.
–
Electro-magnetic compatibility (EMC) – 2004/108/EC.
–
The product has been marked with the CE mark on the data
plate.
Technical data
Technical parameters are given on the product’s data plate.
Allowed time of continuous work of the meat mincer
10 minutes
Required break before following use of the meat mincer
30 minutes