Zelmer cke820 User Manual - Suggestion
38
●
Do not open the lid immediately after water has boiled
– steam might condense and appear on the exterior
of the kettle.
●
Do not place the kettle on or near hot objects.
●
Do not immerse the kettle or the power base in water
when filling or washing the electric kettle.
●
In the event that water gets into the inside electric
elements of the kettle, or onto the power base,
carefully dry these elements before plugging the kettle
into the mains.
●
Do not operate the kettle when empty.
●
Do not use the kettle with the lid open – the automatic
shut off will not work then.
●
Do not use any abrasive cleaning agents such as
emulsions, creams, pastes, etc for cleaning the kettle
body. They might remove graphic information symbols
such as: scales, marks, warning signs, etc.
●
The appliance is not intended to be operated by means
of an external timer or separate remote-control system.
5
Lid release button
6
On/off lever (on-off)
7
Handle
8
Anti-deposit filter
9
Storage space for the connecting cord
Preparation of the electric kettle for
operation
Before the first use, wash the kettle inside
(for washing instructions see “Cleaning and
maintenance”), fill it with water up to the “max”
level, and let it boil four times (use fresh water
each time) and wash again.
Operating instructions of the electric
kettle
1
Press the lid button
(5)
– the kettle lid will open.
2
Place the filter
(8)
in the kettle – if it was taken out before.
3
Fill the kettle up with the desired amount of water
(the level is visible on the indicator
(3)
).
Do not boil the water if it is below the minimum
level or beyond the maximum level on the
indicator (3).
4
Close the lid.
5
Place the kettle on the power base
(4)
.
6
Put the plug of the connecting cord into a mains socket
with an earth pin – the upper part of the kettle body will
light up.
7
Turn the kettle on by pressing the lever
(6)
– the indicator
light will come on.
8
The kettle switches off automatically when the water
has reached the boiling point, the lever switch returns to its
starting position – the light comes off.
If further use of the kettle is anticipated, it is not necessary
to remove the plug of the connecting cord from the power
socket.
Be careful not to fill up with water beyond the
nominal capacity when pouring water into the
kettle.
In the event that an empty kettle is switched
on, it will be switched off automatically by
a thermal device.
To switch on the kettle after it has cooled down
(about 15 min), remove it from the base, fill with
water, replace on the base and switch on by
pressing the switch (6). The cooling down of
the kettle can be accelerated by pouring cold
water into the kettle.
B
SUGGESTION
Information on the product and
suggestions for its use
●
This appliance is intended to be used
in household and similar applications
such as:
●
in shops, offices and other similar
working environments;
●
in farm houses;
●
by clients in hotels, motels and other
residential type environments;
●
in bed and breakfast type
environments.
In case it is used for food business purposes, the
warranty conditions shall change.
●
Do not use the kettle without a filter.
Technical data
The technical parameters are given on the data plate of the
product.
1,7 liter capacity.
Structure of the kettle
1
Spout
2
Kettle body
3
Dual water indicator
4
Revolving power base
A
CKE820-002_v05