ZENEC ZE-TVA Instruction Manual - page 9
9
Deutsch
DIE BATTERIE
1. Öffnen Sie den Batteriefachdeckel, indem Sie die Halterung 1 nach rechts drücken und
den Batteriefachdeckel anschließend nach vorne ziehen (siehe Skizze).
2. Nehmen Sie die neue Batterie und legen sie so in das Batteriefach, das der + Pol nach
oben zeigt (siehe Skizze).
3. Schieben Sie den Batteriefachdeckel wieder zurück in das Gehäuse der Fernbedienung
(siehe Skizze).
BITTE BEACHTEN
■
Wenn die Fernbedienung nicht oder sehr langsam reagiert, müssen Sie wahrscheinlich
die Batterie wechseln.
■
Entfernen Sie die Batterie wenn sie leer ist oder die Fernbedienung längere Zeit nicht
gebraucht wird.
■
Sollte es trotzdem einmal passieren dass die Batterie ausläuft, müssen Sie mit einem
Tuch die Flüssigkeit im Batteriefach entfernen und anschließend eine neue Batterie
einlegen.
■
Bewahren Sie die Batterie außer der Reichweite von kleinen Kindern auf. Sollte die
Batterie von einer Person verschluckt werden, bitte sofort einen Arzt aufsuchen.
6
REMOTE CONTROL BATTERY INSTALLATION
If the remote control does not function correctly or the operating
range is reduced, replace the battery with a new lithium CR2025 type
battery. Make sure to observe the proper polarity placement.
1
T
B
A
T
.
2
3
T
B
A
T
.
1. Push tab to the right.
Pull out the battery
tray.
2. Place battery
into the tray.
3. Return tray to
remote control.
• To Mute the sound.&PRESS DOWN 2S:SND
Press the Mute button.
• Number Pad.
Use the Number button (0-9) to select available channels
Use the (10+) button to select double numeric channels.
• Channel Selections.
Use the CH up button to select next available channel.
Use the CH down button to select the previous channel.
• Erase/Write.
Allows the user to selectively add or remove Television channels
to and from the unit's memory.
• Previous.
Use this button to Search The Previous Viewed Channel
• Next.
Use this button to Search The Next Viewed Channel
TVB-102/P manual.qxd 8/11/2005 3:17 PM Page 7
6
REMOTE CONTROL BATTERY INSTALLATION
If the remote control does not function correctly or the operating
range is reduced, replace the battery with a new lithium CR2025 type
battery. Make sure to observe the proper polarity placement.
1
T
B
A
T
.
2
3
T
B
A
T
.
1. Push tab to the right.
Pull out the battery
tray.
2. Place battery
into the tray.
3. Return tray to
remote control.
• To Mute the sound.&PRESS DOWN 2S:SND
Press the Mute button.
• Number Pad.
Use the Number button (0-9) to select available channels
Use the (10+) button to select double numeric channels.
• Channel Selections.
Use the CH up button to select next available channel.
Use the CH down button to select the previous channel.
• Erase/Write.
Allows the user to selectively add or remove Television channels
to and from the unit's memory.
• Previous.
Use this button to Search The Previous Viewed Channel
• Next.
Use this button to Search The Next Viewed Channel
TVB-102/P manual.qxd 8/11/2005 3:17 PM Page 7
6
REMOTE CONTROL BATTERY INSTALLATION
If the remote control does not function correctly or the operating
range is reduced, replace the battery with a new lithium CR2025 type
battery. Make sure to observe the proper polarity placement.
1
T
B
A
T
.
2
3
T
B
A
T
.
1. Push tab to the right.
Pull out the battery
tray.
2. Place battery
into the tray.
3. Return tray to
remote control.
• To Mute the sound.&PRESS DOWN 2S:SND
Press the Mute button.
• Number Pad.
Use the Number button (0-9) to select available channels
Use the (10+) button to select double numeric channels.
• Channel Selections.
Use the CH up button to select next available channel.
Use the CH down button to select the previous channel.
• Erase/Write.
Allows the user to selectively add or remove Television channels
to and from the unit's memory.
• Previous.
Use this button to Search The Previous Viewed Channel
• Next.
Use this button to Search The Next Viewed Channel
TVB-102/P manual.qxd 8/11/2005 3:17 PM Page 7
ZE-TVA Manual D+E neu.indd 9
02.12.2005 19:09:42 Uhr