Zenesis ZN-502R AS Quick User Manual

Page of 4

Download

Bookmark us

ZN-502R AS/S/A

Quick User Guide

Revision A

For full details, please visit www.zenesisalarms.com

Remote Control Button Layout

Feature Descriptions - Zenesis Remote Control

Feature

Brake/Button Sequence

Brake Pedal

(Hold Down while Programming)

First Button

Second Button

Door Lock / Arm (502R A/AS)

Door Unlock / Disarm (502R A/AS)

Remote Control Button Hold

x 3

Remote Start

(2 sec)

Convenience Run

(2 sec)

Vehicle Status

Panic (502R A/AS)

(2 sec)

Temperature Status

(2 sec)

Trunk Release

(2 sec)

Siren Mute ON/OFF(1)

(2 sec)

Remote Control Beep Mute ON/OFF

(2 sec)

Valet Mode ON/OFF(2)

(2 sec)

Farenheit / Celsius

(2 sec)

Page 1
Zn-502r as/s/a quick user guide revision a for full details, please visit www.Zenesisalarms.Com remote control button layout feature descriptions - zenesis remote control feature brake/button sequence brake pedal (hold down while programming) first button second button door lock / arm (502r a/as) do...
Page 2
Feature descriptions feature notes (1) siren mute can also be turned on/off by pressing and releasing the (foot) brake pedal 8 times and holding down the (foot) brake pedal on the 8 th press for at least 3 seconds. 1 parking light flash and 1 siren chirp signifies that siren mute is on. 2 parking li...
Page 3
Remote control registration 1) insert the key into the key cylinder and turn to the on position (engine is off). 2) press (foot) brake pedal 4 times. On the 4 th time, hold down the (foot) brake pedal. 3) 3 parking light flashes and 3 siren chirps will confirm remote control programming mode. The le...
Page 4
Z-pass touch (patent pending) the system can be armed or disarmed by “touching” the z-pass touch with a personal identification number (pin) of 4 - 10 digits. 1) pin registration a) insert key into the key cylinder and turn to the on position (engine off). B) within 3 seconds, press and hold enter u...