Zenesis ZN-502R AS Quick User Manual - page 2
Feature Descriptions
Feature Notes
(1) Siren Mute can also be turned ON/OFF by pressing and releasing the (Foot) Brake Pedal 8 times and holding down the (Foot) Brake Pedal on the 8
th
press
for at least 3 seconds. 1 Parking Light flash and 1 Siren chirp signifies that Siren Mute is ON. 2 Parking Light flashes and 2 Siren chirps signifies that Siren
Mute is OFF.
(2) Valet mode can also be turned ON/OFF by pressing and releasing the (Foot) Brake Pedal 6 times and holding down the (Foot) Brake Pedal on the 6
th
press
for at least 3 seconds. 1 Parking Light flash and 1 Siren chirp signifies that Valet mode is ON. 2 Parking Light flashes and 2 Siren chirps signifies that Valet
mode is OFF.
(3) For automatic transmission vehicles in Automatic Remote Start Reservation Mode, the Automatic Remote Start Reservation procedure must be followed.
User Programmable Options
Enter User Programmable Options Mode by pressing and releasing
3 times and then press and release
1 time. “USEt” will appear on the 2-way Re-
mote Control. The Blue LED will blink 5 times on the 1-way Remote Control. Refer to the table below for the various features and options.
Feature
Brake/Button Sequence
Brake Pedal
(Hold Down while Programming)
First Button
Second Button
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
x 2
Channel 6
x 2
Channel 7
x 2
Channel 8
x 2
Passive Arm ON/OFF
x 3
Shock Sensor ON/OFF
x 3
Ignition Lock ON/OFF
x 3
User Programmable Options
x 3
Safety Rearm ON/OFF
x 4
ZMATIC Super Intelligent Turbo Timer ON/
OFF/Auto (Normal)/Auto (Extreme)
(Patent Pending)(3)
x 4
Second Car Control
x 5
Cold/Hot Start Timer Options
x 5
Feature
Options (Third Button)
First Button
Second Button
(Default Values)
Diesel Warm Up Time
30 sec
15 sec
7.5 sec
Siren Sound Time
30 sec
70 sec
100 sec
Turbo Timer Run Time
1 min
2 min
5 min
Remote Start Reservation
Automatic
Manual
Remote Start Run Time
15 min
5 min
25 min
Button Combination